Focus Fanatics Forum banner

Glowshift Gauge Disasemble.

5K views 4 replies 3 participants last post by  sbc17 
#1 ·
Alright, so I am in the process of making a custom face to match the OEM SVT gauges(silver face green glow) I have a Glowhift Voltage gauge and I have disassembled it almost completely. I am just stuck on the needle. I have carefully tried to pry at it with no luck. I don't want to break it but it needs Come off for me to replace the face.

Anybody successfully take the needle off without busting it? I know it's "only a cheap gauge" but this is what I can afford and I want it to match the dash.
 
#3 ·
I have pulled on it and that sucker won't come off. I even tried using a fork. Lol

I even talked direct with Glowshift and they said they haven't even done it.

I think I am gonna have to carefully cut it and the re attach the top with a very small screw so it can be removed again if need be. Wish me luck!!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top