|03-08-2006 12:40 AM|
Here is an instruction on how to do the separation. Please note that it explains how to replace the reverse lights with the turn lights.
However, if you want to add the indicator function to the reverse lights without disabling them, you will need some additional instructions. I didn't do it myself, but being an EEE major, I am sure it would work just fine. I will post them in a couple of days because right now I am struggling with the midterms.
|03-07-2006 10:08 AM|
Peter can you please PM me with the information on how to do the turnlight/reverse light wiring.
Or just post here, but I would like to know this info since I bought euro lights with clear turn signals which I want to turn into Reverse lights and also keep them as turns.
|03-07-2006 02:57 AM|
Re: Tail light wiring mod question
P.S. I personally think that white rear indicators (although illegal) look rather nice. I mean, they are even less confusing than red turn lights which are often combined with the brake lights. I myself was using the reverse lights as the turn indicators for quite a while and never had any problems with the police. Just my 10 pennies
|03-06-2006 02:05 PM|
|Phacade||Not only does that sound silly, its likely illegal as well. Just a thought.|
|03-06-2006 12:16 PM|
Tail light wiring mod question
Ok I know about the mod to make switch the blinkers and tail lights but is there any way to do the following...
-Have the brake light and turn signal light on at all times
-Have the brake light and turn signal light, light up at the same time when the brakes are pressed
-Have the backup light and the turn light signal at the same time when the turn signal is activated
If anyone can help with these please let me know. I think it would be neat to have the lights work way differently