|04-03-2014 02:18 PM|
BTW: just found a "steal" on one locally:
Steal if your the seller....
|04-03-2014 01:23 PM|
|04-02-2014 10:08 PM|
|01-04-2014 11:43 PM|
|lmcd314||i have done two spi rebuilds, both of which only required a new #4 piston and a new head, i did the first one in about 3 weeks, and the second took a week ish, between work and school. for new parts its about 800 dollars in parts, i made about $1500 off of the second one.|
|01-01-2014 02:05 AM|
would be interesting if organized well. Thx
|12-23-2013 07:53 PM|
|crxls||Are you guys making a decent profit on buying these cars with dropped valve seats? Can I as how much you're paying for them, how much you're putting into tjem.and how much they are selling for?|
|12-23-2013 06:57 PM|
|12-23-2013 05:54 PM|
Thanks for the shout-out!
Got close to buying another one to repair, but never heard back from the guy.
|11-15-2013 07:37 PM|
Yes I have been thinking about doing a build. I have read a lot about people doing swaps and after all that I have read I would really like to know how and if any one has done one. One of the main things I would like to know is if anyone has done a head swap to a DOHC with the SPI.
I picked up an 04 LX with 223K miles for 700 and here are the pictures. http://s828.photobucket.com/user/stevemcc0372/library/
The more and more I dig into it the more and more I am thinking I got ripped off. The body has a few minor dings and scratches but is real good. The interior has a few stains and is dirty but no rips, Dash is good, everything is stock.
The issues are under the hood. I have ordered and got a few parts and replaced them and it can pass inspection now. Believe it or not that car will still run 80 mph down the road. The issues are that some one must have ran it off the road cause the radiator is held on with wire, the AC lines flop around in the wind, and there is a lot of missing plastic pieces under the hood and wheel wells.
Does anyone know where to get a engine built like balanced and new pistons or it is not worth it for this car?
I did notice there are a few short blocks on ebay for under 500 but they are stripped. and need everything else added to it.
|10-15-2013 12:51 PM|
My engine is going bad 8 believe it's the infamous problem with the valve seat failing in the 2.0 spi... I'm looking for assist work either a swap to a zetech or rebuild of my current engine
Sent from my LG-P769 using FF Mobile now Free
|This thread has more than 10 replies. Click here to review the whole thread.|