|06-09-2014 12:00 PM|
|06-09-2014 11:58 AM|
As far as stealing, the gauge faces are one of their stock designs. I just had them add the little "Focus" logo which I didn't design in the 1st place. Would've looked better lower or even on the bottom instead of the top, but the headlights on indicator is on the bottom.
|06-07-2014 07:07 PM|
|06-07-2014 06:44 PM|
I hope you don't mind if I steal this, I love the way the blue faces look. I wish there was more blue lighting.
|06-07-2014 03:41 PM|
|NewYorican89||Here ya go|
|06-07-2014 03:13 PM|
|06-07-2014 03:12 PM|
|06-07-2014 12:32 PM|
I had a bear of a time getting needles adjusted. Some of my observations:
--I was using the Torque app with Bluetooth OBD2 adapter to check RPM, fuel level and speed. That worked great.
--The cruise control speed on the small screen was also very helpful.
--For the longest time, every time I turned engine off, the needle jump to rest position was totally unpredictable. Sometimes left, sometimes right, sometimes none at all. What eventually helped was that I started untightening the needle (counter-clockwise turn). Apparently I had pushed them down to hard. Doing this I found a sweet spot where the rest jump was repeatable.
--I seemed to have a lot more luck when I adjusted the needles in the rest position, rather than while ignition was on.
Thanks for the great thread. Very helpful.
|05-22-2014 10:48 PM|
|2013Tuxe||FYI: checked with Village Ford, and the red ST gauge needles are not sold separately.|
|05-19-2014 06:41 PM|
|Pennut||My pictures of my Sapphire blue gauge faces doesn't do them justice. In the sunlight when the sunlight is hitting directly on them, they actually have a slight metallic sparkle to them. I will try to get a picture when I can in the sunlight. I actually wanted the Focus logo lower more towards the center, but they said it would be over the idiot lights when/if they illuminated. In retrospect, don't think it would have been a big deal as the idiot lights would shine through the logo anyways if it was lower. I had thought instead of putting the Focus logo in between the fuel and temp gauges, but then it would have to have been a bit smaller to fit.|
|This thread has more than 10 replies. Click here to review the whole thread.|