|Yesterday 10:15 PM|
Replaced both passenger side window regulator. First time all 4 windows have ever worked since I've owned it.
Fixed cruise control. Need to R&R the control unit.
|Yesterday 09:56 PM|
Only removed shocks on mine, and yes the 36" bar to get old ones out without a compressor.
One bar to lower the suspension & another to lever out the spring.
|Yesterday 09:46 PM|
I also need to get the torch out and heat up the bottom arm bolt. It is been Michigan welded in-place. This sucker is Fighting me and I hate it.
|Yesterday 08:21 PM|
Hack a chunk of pipe to size for a spacer?
Rear springs will lever out once the shock is detached to drop the suspension, lowered springs only need a little compression to get 'em in when you lever the suspension down as far as it'll go.
|Yesterday 08:05 PM|
|nboyles85737||Iirc our cars have the same rear sub frame. I'm pretty sure my build thread has info you may find useful.|
|Yesterday 08:00 PM|
|cannaert||Got the Front lowering spring installed. Tried to get the rears done, Found out the rear coils are broken off at the around a 1 1/4 coils up. Also have no way to compress the new coils because the tool I have has no Spacers.|
|Yesterday 07:05 PM|
|mysvtny||Cleaned my car from from all the nasty bugs, and gave it a nice coat of wax|
|Yesterday 05:45 PM|
|hard aground||Yeah. Post piccys of the router table when you get it together.|
|Yesterday 02:32 PM|
|Yesterday 12:17 AM|
|FreeFocus||Crack in the SVT bumper is almost fixed. maybe a couple more layers on the outside to fill completely. Its between the lower grill and lip, not a whole lot of room to work with. But its progress. Going to sand down with 800 grit and off to the painters for a toreador red metallic color swap. Woohoo.|
|This thread has more than 10 replies. Click here to review the whole thread.|