|10-28-2013 08:10 AM|
I use my XCal to check DTCs on my wife's van all the time, and I've never seen a message on the first screen telling me that it was unlocked. Mine is an XCal2 though.
|10-25-2013 09:56 PM|
If it's an xcal III, Tom can not 'unmarry' it. That procedure is done by SCT only.
Which is, if you'd send it to Tom, he'd send it to SCT.
As noted, the few extra bucks for new is well worth the lower hassle/headache. Plus SCT will stand behind a new product.
Used, not so much.
|10-23-2013 12:10 PM|
There is a screen that tells you on the device if its unlocked.
And yes you send Tom your payment with the required information once you have the XCAL(mods, SCT VIN, ECU Code etc...).
He sends you a tune file (via email) you load it onto the XCAL and then onto your car (then it becomes locked to your car).
Then you datalog and send the file to Tom hes sends an update back to you.... rinse and repeat util its finished. Any new mods you get and you just data log again and then send it to Tom for a retune free of charge.
|10-23-2013 10:39 AM|
|Bogey||So the guy said it isn't married, but how would I be able to tell with the device? And since it isn't married it is able to have the tune file on it removed and replaced by tom?|
|10-23-2013 06:41 AM|
Married (paired or locked) = Tune from the XCAL is loaded on the car.
Unmarried (unpaired or unlocked) = Tuned car was returned to stock or was never loaded or you paid SCT to clear it.
If you want to use an XCAL that is locked you must either return the vechicle it is married too back to stock, or send the unit to SCT and have them unlock it for a fee (150.00 if i remember correctly).
If you buy a used XCAL thats locked for say 100 and then you need to pay 150 to have it unlocked from SCT and then you have to pay 150 for a custom tune you arent saving any time or money when you could have just purchased one from Tom for 399.00 with unlimited free updates as long as your NA.
|10-23-2013 01:39 AM|
Example; a guy on kijiji is sellinghttp://www.fswerks.com/collections/focus-st-2013/products/fswerks-sct-x3-ecu-flash-programmer-ford-focus-st-2013
Is it possible to flash the device and wipe the preloaded tunes on it? And possibility of un pairing it?
|10-23-2013 01:36 AM|
|Bogey||What exactly is married? Other then a device that's been paired. What is the procedure for Un marrying it?|
|04-30-2013 11:00 AM|
I'll definitely be in contact with you about the tune, Tom. I see you do good work!
I figured a full tune would be needed... Frankly I'm looking forward to it lol.
Thanks for the link!
|04-30-2013 10:26 AM|
I charge 150.00 for a full custom tune , free tune updates and datalogging services
No sense in paying for a tune to have the EGR turned off and not do a performance tune as well
|04-30-2013 10:21 AM|
EGR block off plate
Sorry cant help ya with the tuner tho
|This thread has more than 10 replies. Click here to review the whole thread.|