|04-08-2013 01:19 PM|
|Kyllgore||Finally did this, purchased all new endlinks, the delrin rear shock washers, new strut mounts with bearings. Lemme tell you to do those washers to fit in the rear I had to cut away the rubberin the center of the rear mounts. the rear uppers were the most irritating part of the swap. I still have not put the interior back on to cover it up.|
|04-01-2013 02:29 PM|
|Kyllgore||ok so I have found new strut mount/bearings anything else not included in the m-3000-zx3 kit that would be a good idea to replace.|
|04-01-2013 02:14 PM|
Thank you for mentioning them and the part #.
I had forgotten rock auto I'll look for more parts there as well.
|04-01-2013 01:57 PM|
|mark3inline||Didn't know link was diiferent sway bar is the same found it at rockauto RAYBESTOS Part # 5451184|
|04-01-2013 01:43 PM|
Just ordered mine from amazon
most likely will be installing it in 2 weeks.
Now here's a few of the questions I have been having trouble finding info for.
New swaybar endlinks (the ones at auto parts stores all say
'except for svt") I have yet to find a unique pair for the svt.
It seems I will be needing new strut bearings and strut mounts as well.
Again I see nothing specific for svt, also the ford install manual does not mention strut cushions or boots?
I would just like to have everything I need before starting this project.
If I can get new strut mounts and all, would I be able to mount the springs
to the strut before taking it to the garage?