|08-23-2014 09:25 AM|
|ClutchMaster0X9||Hi Im new to the forum, I was on the phone talking to Ksport salesman, Eric. He stated that the 2000-2005 and 2006-2007 Focus coils were re manufactured since last year. He went on to say that there systems will last years but that would only be possible with routine cleaning and maintenance rather than just throwing them on and putting them through hell like the majority of coilover buyers do. I say still by Ksport. Im actually stuck between Ksport and ST suspension. I was gonna go eibach sportlines and konis but i wanted that adjustability.|
|05-02-2014 10:27 AM|
|05-01-2014 02:50 PM|
|quacking05focus||The st coilover setup is a great option, installed mine November of 2012 and they still feel like new. 800 shipped on eBay was a great deal (90310 was the part number if I remember correctly).|
|05-01-2014 10:35 AM|
|05-01-2014 10:24 AM|
jsquared, also check out ST coilovers, they are made by KW and have been one of the lowered priced options.
For rear camber, you can try camber bolts first for +/-1 degree ~$25) or adjustable camber arms ($120-170/pair, depending on how much camber you want/need.)
Adjustable rear toe arms will probably cost you around $150-170.
Adjustable front parts can be a little trickier to install, either adding camber plates or adjustable tubular control arms.
Link below is for CFM but plenty of other places sell them, will give a starting point.
|05-01-2014 04:29 AM|
|sailor||Moved to Brakes, Suspension & Chassis so this can be searched easier.|
|04-30-2014 10:08 PM|
|gimmemoreboost||Get BC instead. That is what I have. They have adjustable camber plates built in up front. I tuck a 45 series on a 16 inch wheel. No camber/toe arms and no tubular control arms. Only after market suspension parts are coilovers and wheels.|
|04-30-2014 10:05 PM|
So how much did everything else cost? I'm looking into ksport coilovers, should have the money in a few weeks. But I want to do this right, so how much are all the addons?
|03-27-2013 05:20 PM|
|gimmemoreboost||Im ordering ksports next week. Looking to be at 22" fender heights on the stock wheels with 205/50's. Then rock a 16x8 front 16x9 rear setup on 205/40's with 21" front and 22" rear fender heights. Mmmm cant wait to be slammed again|
|03-26-2013 05:03 PM|
|RPMisChris||moar low is in progress. I need to roll the fenders first.|
|This thread has more than 10 replies. Click here to review the whole thread.|