|04-27-2015 07:13 AM|
|04-27-2015 01:39 AM|
|04-16-2015 10:51 PM|
|SteedaNorth||What happened with this? Did you finish the swap?|
|03-17-2013 01:51 AM|
Im gonna start looking into finding a head now that the bolt ons are are out of the way. should be able to buy cams before the end of the month as long as nothing major happens. Should i get the head shaved down? i read somewhere that the 23 head is a higher than the 20? which would decrees my compression which would lower power gains?
Sorry for asking alot of questions guys, i just need some knowledgeable people to let me know what i should do for it to be rite the first time. :)
|03-15-2013 01:51 PM|
You cannot port the 2.0 to get the flow of the 2.3 head and keep the cost worth doing
|03-14-2013 10:16 PM|
|03-14-2013 09:54 PM|
|streetfocus||Keep us informed with the stages as you do it, Jugglethese.|
|03-14-2013 09:49 PM|
|streetfocus||What about P&P the 2.0 head? Would that be similar?|
|03-14-2013 08:05 PM|
|03-14-2013 07:03 PM|
i just got all my bolt ons today and the tuner from tom. i got intake and the catback and header. there's those stage 1 crane cams that seem to be appropriate for this swap.
So if i bought a 2.3 head i should get it shaved down, polish it, throw the stage 1 cams in. im sure i can find a 2.3 intake manifold from a local scrap yard. if not theres some decent priced intake manifolds off ebay.
In my head this seems like it will work, it only makes sense that will the increased flow and cams the engine should preform better. maybe not a massive amount of gain. but im sure theres some power to be made from this. and its a wicked project to pursue.
|This thread has more than 10 replies. Click here to review the whole thread.|