|Vendors, Dealers & Seller Reviews Good or Bad dealings? Post your vendor, dealer or seller recommendations, feedback and comments here. Members who knowingly post false or malicious information will be banned from the site.
|Topic Review (Newest First)|
|03-07-2013 02:00 PM|
|03-06-2013 12:29 AM|
|ZXthrizzle05||I answered his PM thank Andrei for referring me|
|03-05-2013 12:45 PM|
You always need a restrictor.
The size is slightly different between ball bearing and journal bearing.
Ask zxthrizzle for the size of he knows.
|03-03-2013 04:13 PM|
|700whpfocus||I have A GT 3582R DUAL BALL BEARING URBO. DO I NEED A RESTRICTOR? WHAT SIZE? ITS ON A ZETEC|
|02-27-2013 12:09 AM|
I ran a Precision Turbo with a journal bearing with top speeds kit, with no restrictor, and never had a problem.
I do agree on their communication problems though.
|02-24-2013 11:40 PM|
|02-24-2013 12:00 AM|
|ZXthrizzle05||did you get a .065 size|
|02-15-2013 11:08 PM|
Its a Garrett T - Series. It has journal bearings
The restrictor fixed the issue, but if the drain was at adequate height I believe you wouldn't need to restrict it. And according to Garrett restrictor is the last resort.
|02-15-2013 10:28 PM|
Not a problem on topspeed's part... other then they didn't include an oil restrictor which is kinda odd...
What turbo are you running?
This is what I ran with my gt3071r and never had an issue (its sized at .035" - 3/16 is going to be too large still)
Its HIGHLY suggested that you run a restrictor... you may have already destroyed the oil seals.
I also suggest you post up on focaljet and see if you get a responce from them over there.
|02-15-2013 03:28 PM|
My drain looks very similar to "cwczx3"
I have no restrictor yet. I have a -4an feed and -10AN drain
I ordered a custom fitting from Nitrous express - its 4an and will accept nitrous jets so I can try some different size restrictions.
4an is 1/4"
I will try a 3/16" first then go down if necessary.
Top Speed still does not call anyone back or answer the phone. Even if this is not their issue.
|This thread has more than 10 replies. Click here to review the whole thread.|