|03-03-2013 07:50 AM|
|03-02-2013 08:54 PM|
|ShoOff||Gauge Light or gauges all together not working? I am almost certain that if its the gauges not working and they are having trouble reading the ECM the either the ECM its self is bad or its found a bad ground/short/etc. Which would mean harness. Either way sounds like a headache bro. Oh and i would "assume" that when ford told you they couldnt read the ECM that they too were using a OBD 2 scanner so your reader/scanner wouldnt really do much better. Any chance this isssue is happening at a certain engine temp and not necc. about how LONG the car has been running?|
|03-02-2013 04:32 PM|
|03-02-2013 02:30 PM|
|silvrbuletZX3||Well thanks for the info hope its not that . It's at ford so I can't play with anything on it right now. It works after a long drive I feel like something is draining my power|
|03-02-2013 11:43 AM|
So, your gauges are having issues? Or your ECM is having issues?
Yeah, I also think if they are having issues just plugging up to the computer, you may have a large problem there. For giggles, have you tried plugging in an OBD-II reader just to see if it picks up anything?
If it doesn't, your OBD-II port could be the start to fix your issue, which if I can remember is part of the ECM assembly.
Ford could fix it, but wow that would be super expensive and the ECM fix is not a DIY project at all.
|03-02-2013 10:05 AM|
|silvrbuletZX3||My mileage also jumped up 60+ thousand miles. It comes on too when I've driven for a fue hours|
|03-01-2013 08:52 AM|
|ShoOff||if they cant communicate with the ecm chances are thats the same problem your gauges are having. replace?|
|03-01-2013 08:40 AM|
Help!! Ford can't seem to fix my car
Gauges don't work but do come back on after a lot of driving like hours.
They said no bad grounds, altinator workin just fine and they can not communicate with my ecu with there computers