|11-11-2015 09:10 PM|
|Btravelen||Correct. The 2013's didn't either. I opted for the homelink install on my '13. I have the telescoping visors on my VW, and its a helpful feature, but the garage opener button on the visor is more important.|
|11-11-2015 06:56 PM|
|Vlad_x35||From what I understand the 2012 Visor does not have the "telescope" function?|
|01-05-2015 03:28 PM|
Thanks for posting the part numbers for the retainer and screw caps. I just finished the same install in mine. I would have had no idea that there were covers for the (now) exposed screws without your post.
|10-25-2014 12:49 PM|
I just installed the homelink visor in my '14 Ti. Thanks to all for the help on this. My total cost was $117.
1 CM5Z-5804105-FA Visor
1 2S6Z-5804132-AA Retainer
2 CM5Z-4273-AA Screw cap
|05-31-2014 03:24 PM|
|05-31-2014 03:23 PM|
The over mounting plate is a little bit larger, the holes are still in the same place and the visor does mount. That being said, the angle that the rod going through the mount is different and when you try to swing the visor out it hits the ceiling.
Also, the connector is different, but anyone with the skill to use a soldering iron could easily over come that....
I would say this is a NO GO. I am now wondering about other models such as the Fusion etc... This is an interesting search for sure. For now, I am still using the 2012 and earlier visor with HomeLink.
|05-30-2014 01:03 PM|
|Briggs||Do they sale black visors?|
|05-27-2014 09:22 AM|
|04-29-2014 11:32 AM|
I did find one other thing, I am able to release the pins in the connector just in case the Escape uses a different connector I am thinking I can slide them out of the existing connector from the Focus and into the connector on the Escape visor. But this is only if the connectors are different, not sure about this yet.
|04-29-2014 11:28 AM|
|Ralliart||Awesome. Is there a version of the escape that comes with a black headliner?|
|This thread has more than 10 replies. Click here to review the whole thread.|