|02-08-2013 06:29 PM|
|qweesy||ok well anybody that wants A NEW massive bolt PM me $15 SHIPPED first come first serve|
|02-08-2013 05:09 PM|
|slim02svt||thanx, i already ordered the arp bolt|
|02-08-2013 05:03 PM|
|macdiesel||Isn't the exhaust cam like a shallow torx? I can see how it would strip. Glad the bolt released itself.|
|02-08-2013 04:46 PM|
I wasn't aware this was a common problem, that bolt never gave me any trouble at all. The right Torx bit seems like a very good fit. I guess I can see if it slipped once it could be done for.
Congrats on getting it out though, that's probably a relief to be done with it.
|02-08-2013 03:58 PM|
|qweesy||Massive has a bolt Kit I have a spare one since I got 2 ill sell for $15 SHIPPED brand new never used|
|02-08-2013 01:28 PM|
|sally03svt||home depot our an auto parts store sells the sockets used for stripped nuts they work wonders !|
|02-07-2013 11:36 PM|
|slim02svt||I got out this morning and used an old timing belt,wrapped the gear used an 18in pipe wrench on the gear making sure to have the bite over the gear spokes and it twisted right out. I used the belt to protect the gear and made sure to have the wrench bite on the supported part of the gear and it worked like a charm. was using a combo wrench to hold the cam at the same time. thanx to all who gave advice it is greatly appreciated|
|02-07-2013 04:47 AM|
|slim02svt||That is going to be my plan b. I just did not have it in me to take a chisel and beater to it just yet. I have a welder at the house and thanks for the suggestion, that is one that i did not think of yet|
|02-06-2013 10:15 PM|
|sleepyboy||Tom's idea sounds like the one I'd use|
|02-06-2013 09:28 PM|
None of that sounds like fun ... good luck with finding a solution to getting it off.
|This thread has more than 10 replies. Click here to review the whole thread.|