|Auto Washing, Detailing & Paint Protection Discuss wax, polish, chamois, microfiber towels, simple cloth towel, scratch repair and paint protection. Use this Forum to discuss your cleaning tricks and techniques.
|Topic Review (Newest First)|
|02-02-2013 10:25 PM|
|Dave@TLC||Great write up! I would add that it is a good idea to add a good quality sealant or coating to the headlights once they are corrected. This will help prevent them from fogging back up too quickly.|
|01-29-2013 07:48 AM|
Ive done it that way as well. And It works wonders. Nice job.
|01-29-2013 07:06 AM|
|cdbertrand||Hmmm interesting. might have to hit up dollar general and get a tube haha.|
|01-29-2013 07:00 AM|
|nickstewartroc||I just used some old tube I had, I think it was Crest or something|
|01-29-2013 06:58 AM|
|cdbertrand||What kind exactly?|
|01-28-2013 09:05 PM|
If you don't have the cutting compound, you can try toothpaste! Just did it to my gf's Pt Cruiser, and damn, they look brand new! Just another input is all
|01-14-2013 07:03 AM|
|cdbertrand||Definetly trying this soon. What exact product am I to coat the lens with after this step?|
|01-10-2013 07:39 PM|
If you start with a more aggressive abrasive, it goes a whole lot faster.
I wet sand starting with 1000 grit, then 1500, then 2000.....then a liquid or paste as shown in the pics above.
|01-09-2013 10:37 AM|
That is a great write up! I will have to do this to my car. They aren't terrible but I am sure it is easier to do when there is less damage.
My only question is, will doing this remove the "tint" from the SVT headlights? I dunno if that is a coating on the lens or if it is part of the plastic.
|01-09-2013 09:58 AM|
|1sloho||also, suggest putting some kind of protectant over the headlights or, they will just haze back over. something like lamin-x or what i did, use 50/50 mix of spar urethane and mineral spirits and put several coats over the housing.|
|This thread has more than 10 replies. Click here to review the whole thread.|