|04-30-2013 07:14 PM|
|Marbs||I have a universal dual that I do not need if you want it.|
|01-31-2013 08:11 AM|
|01-31-2013 06:58 AM|
|badazz2010focus||hmmmmm for some reason I thought there were.....but that doesnt mean that that thing cant become a deadly object in a car accident LOL.....I wanted one too still do I just need some good autometer gauges :)|
|01-31-2013 04:49 AM|
|nowhere67||Alright, thanks a lot for the suggestions. I am just looking for one for the AFR gauge when I put in my header and begin datalogging.|
|01-30-2013 08:13 PM|
|01-30-2013 06:50 PM|
I had A pillar gauges for my turbo setup. I got a universal dual gauge pod from Glowshift and I used a heat gun to form/shape into my a pillar.
BTW, there isn't any air bags in the A pillar.
Here's a link:
White cord was used for AFR Datalogging with the SCT flasher.
|01-30-2013 05:40 PM|
|badazz2010focus||no there arent any specific ones for the 08 11's plus you have a pillar airbags to contend with so unless you want your gauges to become missles in a car accident i suggest you dont do it.|
|01-30-2013 04:19 PM|
|Kipp||the password jdm is a universal pillar mount. spyder ones are dash mount. i haven't seen any specific to the 08-11 focus. but there are universal ones that can be made to work. or you can always fiberglass a full pod or mold in a universal pod.|
|01-30-2013 03:22 PM|
|01-30-2013 03:20 PM|
|FOCUS.FREAK||Did some searching and came up on Andy's auto parts and found the password jdm and spyder gauge pods look the best can't tell if they go on the pillar.|
|This thread has more than 10 replies. Click here to review the whole thread.|