|01-07-2017 01:23 AM|
I did write it up as three main positions so it fits your 6-spd as well.
Reverse is an extra move to one side from the main three of the left/right cable operation.
From centered, you normally press the lever left to be able to move it forward and back for 1st & 2nd - leave it alone for 3rd & 4th - and to the right position for 5th & sixth.
|01-06-2017 10:22 PM|
|laser411||Wouldn't it be 4 though since it's a 6 speed and we have reverse?|
|01-06-2017 05:40 PM|
Yes, basically the same for any cable operated shifter.
The idea is to get the lever in the middle of it's travel for the middle position of the transmission levers. Some have posted alternative methods involving setting cable length at an extreme position (shift and trans levers at an in gear position) then checking the opposite positions & neutral to see if the lever comes back to center and has normal travel in each direction.
Clear as mud?
Just think of the shift lever & trans levers as having three main positions, fully in either direction or centered.
|01-06-2017 02:29 PM|
|laser411||Is this process basically the same for the SVT?|
|05-02-2015 02:54 AM|
Have you tried a local or on-line Ford Dealer?
Village Ford, Tasca Ford, Autonation White Bear Lake Ford?
|05-01-2015 07:33 PM|
where can i get the cable i cant find it anywhere part number anything
|06-30-2014 06:34 PM|
I just wanted to tell the op thanks for the write up. Great job identifying all the hidden screws on the interior. Still lots of wiggling things around to get them moving on this job though. She's done now and shifting great. Now on to the lower ball joint, lol.
|05-25-2014 04:40 PM|
About adjusting the cables.
I was wondering if there is a video showing how to adjust my cables. I already installed them. And Both orange clips are showing. The Gearbox counterweight has plenty of space. But I still can barely shift it into reverse. and The fluid level is topped off. The only thing I believe is left is to just adjust them. But I'm confused by just reading it. The cables don't seem to have that much play to begin with. I would really appreciate if you could help me out.
|09-18-2013 09:40 PM|
|Justcantfocus1627||I was wondering if I could get more information on taking off the cable clamp I can't seem to get it off. It's sliding freely with the orange button pushed in but it won't come off the black part due to a little bump it's the white clamp|
|01-24-2013 01:57 PM|
|Tom||Added this to the how-to archive. If you want to email me your address and color preference I can send you out a couple of decals.|
|This thread has more than 10 replies. Click here to review the whole thread.|