|Car Audio, SYNC, MyFord Touch & Electronics The Forum for the Ford Focus audiophiles. The place to chat about automobile sound systems, security systems, or show off your I.C.E.!
Sponsored By: GT Sound Control
|Topic Review (Newest First)|
|01-17-2013 09:14 AM|
|Urbanspacedude91||Thanks I just want to get it done and done right. I would hate to take it all apart again after putting it back together. Lol|
|01-17-2013 09:02 AM|
|Kipp||that's what we're here for! I'm a professional installer so i'm more than willing to help out. and props to you for asking for advice now rather than trying it and having issues then trying to troubleshoot it after.|
|01-17-2013 08:55 AM|
|Urbanspacedude91||You have no idea how valuable your info is . Thanks alot im doing this tonight!!|
|01-17-2013 08:41 AM|
|Kipp||constant and ground are in the factory radio harness so that's not an issue. just need to get acc from somewhere else. i'm not a fan of doing fuse taps, but alot of people use them with no issues. you just need a good acc source (does not have power during start) and tap that and make sure to put an inline fuse on it for added protection and you should be good.|
|01-16-2013 04:29 PM|
|Urbanspacedude91||So i shouldnt have to worry about adding another ground or 12v constant?? Just an acc wire?? Thisis the info i been looking for that took me like three days to find. Can i just run it to the ign switch fuse??|
|01-16-2013 04:22 PM|
YOU ARE THE MAN!!!
|01-15-2013 08:21 AM|
the first link with the second plug with the rca's on it is for if you have the factory sub so that you can retain it. the second one doesn't have the sub connector included. neither of those will retain sync (that's a special harness with a module on it.
here's the issue you will have with either of those kits. there is no accesory power in the factory harness on the 08-11 focus. with either of those you will need to run an acc wire to somewhere else in the car such as the ignition harness. there are harnesses made that will take the factory data signal and give you an acc output and another harness that will allow you to retain sync as long as the aftermarket headunit has an aux input on it (preferably on the back).
here's the one to retain sync
i can't find the other one at the moment, they may not make it anymore.
|01-14-2013 06:25 PM|
|badazz2010focus||you'll loose sync capibilty I dont have sync myself so I dont really know what would happen if you tried to use a base harness on a sync system as to wether or not the headunit would turn on or not...I mean I dont see why it wouldnt because all the sync harness does is retain it.|
|01-14-2013 02:09 PM|
|01-13-2013 04:24 PM|
|Urbanspacedude91||I do have the sync so without the harness the radio wont turn on at all??|
|This thread has more than 10 replies. Click here to review the whole thread.|