|08-12-2014 01:22 AM|
|Rotaryrocket||My rear seats are used primarily by my dogs...and while they are better company than most people, I wouldn't go through the trouble to give them heated seats...lol Just give your passengers a fleece blanket... hehe|
|01-15-2013 03:55 PM|
|drewts86||Meh, not such a big deal for me. I spend a lot of time in the snow during the winter, regularly with a car full of guests headed to the mountain to snowboard/ski, so for me this isn't that big of a deal.|
|01-15-2013 03:08 PM|
|RonMaiden||Alot of work for something that might get used very little. Heated seats are a nice creature comfort but it's not like your rear passengers are suffering without them.|
|01-15-2013 02:50 PM|
The traction control button is like the defrost buttons except it looks more the part. There isn't anything in those buttons to modify, they just send an electric pulse to the computer that controls whatever it is. There is a "chip" in the defrost buttons, but I don't know if it has the control for the "latching".
A momentary latching relay would work, but like you said it won't do hi/lo/off.
|01-15-2013 02:06 PM|
Been researching again, found some seat heater kits that run $37.50 per seat (each kit comes with 1 backrest and 1 bottom heating element), so you could do the entire backseat for $75.
Only issue I can think of is that these heating kits come with their own 3-position switch (hi/lo/off), so you couldn't use the modified defogger switch (2-position, on/off) like I was hoping. Still like the idea of a cutoff relay for when the car turns off. Grrrr
|01-09-2013 03:24 AM|
|drewts86||Was driving back from snowboarding tonight and thought about that momentary (is that the right word) switch I was thinking about. Our car already has a switch that functions so that every time the car is turned on, the switch is off and needs to be engaged/re-engaged. Ford already gave us a brilliant switch for the rear window defogger that functions perfectly for this application. Now just have to pull the switch apart and see how we can tailor it for its new job.|
|12-10-2012 05:54 PM|
I thought about it just as a thought, but I'd never do it.
The factory heater buttons don't self "reset" after the car has been shut off, but they do cut off with the ignition. You can use a relay to cut the heaters off with the ignition, and it's safer to use a relay anyways.
|12-10-2012 04:55 PM|
|CCM302||I have an idea about how to do it. And yes, I agree, they would have to be able to turn off automatically in the way you describe. I think the front seats act like this. If so, I can just mimic how they are setup.|
|12-10-2012 04:34 PM|
I like the idea of having the switch in the back, but I don't like the idea of people leaving the heaters on after they get out of the car. I don't know enough about electronics to build one, but it would be nice to have a system that 1.) shut off the seats when you turn off the ignition, and 2.) after the seats were shutoff, the system would "reset" so that once you turned the car back on the seats would still be off. If the passengers needed their seats heated then they could turn it back on, but that way there would be no way they could be left on for extended periods by accident.
Maybe it's time for me to get a basic circuits book and do a little learning.
|12-10-2012 04:00 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|