|04-25-2013 03:19 PM|
|hurtinfocus||No idea, I found that pic on google images.|
|04-25-2013 03:12 PM|
|04-25-2013 03:06 PM|
if it's not terribly bad, just wire-wheel it and treat it with POR-15 and some spray primer, then grab a pair of the black plastic OEM rocker covers that came on some upper trim level foci and toss them on over your work. will look like new!
|04-25-2013 03:00 PM|
Just in case you haven't got the rocker yet andy's has them for $30 a panel.
|01-23-2013 11:41 AM|
|gondorian||Please keep us posted if you end up doing this. I'm planning to do it eventually so it would be nice to have some pictures of the whole operation. Good luck.|
|01-14-2013 08:14 PM|
|Keithbur12||Ok thanks and I thought they were in different forums|
|01-14-2013 07:51 PM|
Oh and welcome to FF.
P.S. you might not want to start three threads about the same thing.
|01-14-2013 06:42 PM|
|gondorian||It might be easier depending on how worn away your rocker panels are. For me it isn't an option because there isn't enough left to hold in the bondo.|
|01-14-2013 06:28 PM|
|Keithbur12||Do you know if bondo might be easier|
|01-14-2013 06:25 PM|
|gondorian||It isn't bad, but the welding takes skill if you want it to look good.|
|This thread has more than 10 replies. Click here to review the whole thread.|