|07-13-2014 05:51 PM|
|gondorian||Glad it helped.|
|05-20-2014 09:47 AM|
|Ford54191||wow thanks for this i used some of it but also added a few things feels like new! props on the repair!|
|04-11-2014 09:22 AM|
I think this is a great write up! Great fix for guys who are strapped for cash. I may add my 2 cents tho, instead of using bolts and nuts, may i suggest using rivets instead? less chance of them coming out and in my experience, stronger and more rigid...
Once again, great write up!
|02-27-2013 01:11 PM|
|gondorian||The shifter base is made of plastic. I'm not sure how it would be possible to weld it.|
|02-27-2013 11:53 AM|
|Fenris||No offense to the OP but why not just weld it back together, wouldn't that have been easier? I may be wrong but figured I would ask.|
|01-13-2013 07:36 PM|
|whynotthinkwhynot||Edited title, and added to How-To Archive. Great article again!|
|01-13-2013 05:23 PM|
|01-13-2013 11:57 AM|
Here it is installed. It seems to be working pretty well. I've been driving around without my center console so I can look at it. I can definitely see that the extra bracket is taking some of the stress when I'm shifting and I'm glad I put it on.
P.S. If you are taking pictures of your car's internals with a DSLR use a lens hood, mine saved my lens a bunch of times when I was shooting during this project.
|01-12-2013 09:31 PM|
|01-12-2013 02:06 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|