|01-15-2013 09:15 PM|
|amc49||The engines are absolutely two totally different engines, nothing interchanges.|
|01-15-2013 07:56 PM|
|Lawrenceeeeee||Would the 2.0 DOHC Block fit the 2.0 SOHC engine? I would believe so since the cylinder head is mainly whats different correct? If so these are way cheaper and could get my hands on this.|
|01-10-2013 12:45 PM|
|amc49||Expect to pay through the nose...............|
|01-09-2013 11:47 PM|
|eurocars||try car-part.com. you can usually find most any used part there|
|01-09-2013 11:22 PM|
I hate to be the person that says this because I've done the same thing with other cars, but the engine makes this one a bad car to flip (because of the bad valve seat as you mentioned). ANY used engines around are snatched up and are usually at least $1200. Any blocks sold by themselves without the head probably had the same issue. My block was reusable, but I got rid of it.
|01-09-2013 10:48 PM|
Block and Cylinder Head
Whats up guys. Im new here. I bought a 2003 Focus Se VIN P from my buddy that was having trouble with his engine for 400$ and figured ill make a profit out of it. After buying it i read up on problems before i tore it out and found that the valve seals like to fall into the cylinder head and cause a little damage. Well this is exactly what happened with this car and the piston is blown into pieces and the cylinder head aswell as the block are destroyed. I was wondering if anyone could point me in the right direction as to of where i could buy these. I searched ebay but i dont find the right vin and when i do its the crappiest looking block ever.
If anyone could help me out it would be greatly appreciated. Thanks.