|01-09-2013 11:54 AM|
|Fattie||im pretty sure ive got a printer cable here somewhere. my grandfather hordes printers...|
|01-09-2013 09:56 AM|
if the op isnt in a rush, they are less than $5 on amazon and else where on the net
or if you have a newish printer at home, just borrow it from there
|01-08-2013 08:16 PM|
|Incognito27||its type A to type B USB cable , can be found at about any store that carries electronics , walmart , staples , bestbuy, target ,radio shack. costs about 20 bucksish|
|01-08-2013 05:40 PM|
|Fattie||sweet thanks, i guess ill do some research into data logging and such.|
|01-08-2013 04:22 PM|
the xcal2 uses the same USB cable that a printer does. normal usb on one side then the almost square one on the other
|01-08-2013 12:22 PM|
|01-08-2013 12:09 PM|
|rambleon84||Id probably start with having someone experienced look at that tune file and data log from there. See if the tune was loaded properly and that its ok.|
|01-08-2013 11:58 AM|
2.3 modded engine dies out after a few minutes.
car is an 04 2.3 sedan 5spd.
cosworth cams and valve srpings
cosworth intake mani
FC 67mm throttle body
fswerks cold air
no cels , car has an aem air/fuel gauge and it reards just about 15 and sometimes jumps up to 17 while driving.
car *kind of* has a tune , from fswerks. Previous owner said there was an issue downloading the tune.
car goes down the road fine.
any ideas guys ?