|12-29-2012 11:14 PM|
Here is the link for the person that installed the 60mm TB: http://www.focusfanatics.com/forum/showthread.php?t=291737
and I was looking around and found this dont know if its the same TB but its alot cheaper than the other places you can get them:
Also not sure if it can be done to our TB but you could do this if its possible: http://sdbhost.com/cms/docs/TB6optimize.html
|12-29-2012 09:45 PM|
|PSUrivie||There's a lot of people on here making big power with the stock TB. Again, a tune can increase the sensitivity of the throttle response. There is a larger DBW TB you can get from the UK. Someone on here installed it a while back. It is pretty expensive though.|
|12-29-2012 04:34 PM|
I plan on doing a large turbo setup and research has led me to believe that the TB will be the largest bottleneck on the intake stream with such a setup. They make larger ones for the D23 (Which is what will be going in) and was hoping I could convert the TB so that I can go bigger as well.
And I have an MTX, but I can still tell the delay after driving it for a year and getting used to it. I actually gas a split second before I know I need/want power. It may not sound like much, but in an autox it makes a huge difference; and even though I can accommodate for it I'd much rather have throttle on command.
|12-17-2012 11:35 AM|
|PSUrivie||The DBW sensitivity can be adjusted with a tune. That's prob a better option than going with a cable.|
|12-17-2012 11:14 AM|
|Urbanspacedude91||Im with mac.mogul on both statements. i personally think that it wouldnt matter if it is dbw or cable. An intake manifold should do you the justice. I dont know if its just me but i feel like this is just a different version of the BIG THREE just sounds more costly.|
|12-04-2012 04:21 PM|
With the manual I get a little bit of lag but it's barely noticeable.
|12-04-2012 03:44 PM|
|nowhere67||I know I have thought about if you could do it myself. The main reason I want to do it is to improve the throttle response time. I know it bugs me when i go to step on the pedal hard and it takes a second or two to respond.|
|12-04-2012 03:04 PM|
How exactly is it a bottleneck?
I realize that the response can feel a little slower than traditional cable, but when the throttle is open, it's open. You're not bolting on power if you swap to a cable assembly...
|12-04-2012 02:59 PM|
|12-04-2012 07:30 AM|
|wrc_fan||^^I would say, probably looking for better drivablility and performance. One of the few things I hate on my WRX, the DBW just can't keep up with my rev matching. It could be improved with a tune, I know, but I'm not willing to risk my powertrain warranty.|
|This thread has more than 10 replies. Click here to review the whole thread.|