|12-29-2012 01:49 AM|
|sleepyboy||Only if your going to tune it, it will help the tuner dial it in better.|
|12-29-2012 01:36 AM|
Do you guys think i should get a wideband air/fuel ration gauge?
mods are: intake, flex pipe and exhaust
|12-28-2012 05:27 PM|
|felixthecat||On a side note= What's a stock 23 ST mani/cat worth w/ 40,000 miles on it?|
|12-28-2012 02:46 PM|
the guy at the shop had trouble removing the nuts lol he just melted them away, i dont know how much gains it had but it sure does feel different slightly faster acceleration thats for sure ... ohh and the sound didnt increase its the same at least thats what i think
so here it is
|12-28-2012 02:08 PM|
So how did you get the stock flex pipe off?
I havent looked at header/flex on my car lately so I could be wrong but I didnt think they were just bolted on.
So the 2.3's looked like this:
and the 2.0L:
I guess yours is more like this but were the bolts/nuts easily removable (nuts welded on?) Were you able to remove it from under the car, with the header still on?
wonder what, if any, gain there is from the flex pipe...humm. I never wanted to deal with the added noise of an aftermarket header..
|12-28-2012 09:17 AM|
just svt wheels and spoiler for exterior svt stuffs. I put ford logo overlays on the wheels so they wouldnt say SVT too.
|12-28-2012 08:37 AM|
|sleepyboy||The FSwerks flex pipe fits both the automatic and the standard trans equipped foci. This is why it sticks out roughly a 1/2" more. Instead of making one for the auto and one for the standard trannies they just split the difference.|
|12-28-2012 08:23 AM|
|streetfocus||Ah, of course. I should have looked at it closer. Well done, still.|
|12-27-2012 09:27 PM|
|12-27-2012 06:37 PM|
|This thread has more than 10 replies. Click here to review the whole thread.|