|12-13-2012 09:44 AM|
If you pull it back slightly and slowly, you shouldn't break it.
Just make sure you have a flash light ready to look as well.
And the Motor Mount really isn't that hard to loosen to remove it. And of course you can use a jack to pump up under the engine to support it.
|12-12-2012 10:48 PM|
|cossieboy||Thanks guys i will attempt it and let you guys know what i broke lol|
|12-12-2012 09:37 PM|
|Sniper Focus||It sounds bad, but it's not once you do it. It's one of those "the long way is the short way" kind of things.|
|12-12-2012 09:34 PM|
|bbcobra||that's what it takes. You can pull it back enough to see the top of the belt, but you have to loosen the mount to get to the bottom of the cover. You'll need to support the engine from the bottom.|
|12-12-2012 09:29 PM|
|12-12-2012 08:54 PM|
|Sniper Focus||There's four bolts holding it on, and you have to remove to motor mount to get it off without breaking it. Great design...|
|12-12-2012 08:28 PM|
How do i remove the upper cambelt cover
As the topic states .... I loosened 2 screws that i could see but still cant get the cover off , any ideas besides breaking it off lol