|12-19-2012 04:17 PM|
Then, I'm going to agree with Tom. Why even bother? The Zetec-R was a 212HP motor WITH a snail. An SVT or a base 2.0 Zetec will hold more power for less money.
Just Build your current Zetec out properly. Port and polish, overbore and a good set of forged internals will hold so much more power...
|12-19-2012 04:12 PM|
|12-19-2012 04:11 PM|
|12-19-2012 03:59 PM|
|Focus112||Volvo c30 has the T5 turbo...not a zetec|
|12-19-2012 03:51 PM|
|n00btard||A Volvo C30 is efectively the same drivetrain. Go hunt for a rolled donor.|
|12-11-2012 04:10 PM|
Well they have low compression ratio pistons at 8.x(can't remember exactly):1 vs the standard zetec IIRC @ 9.6:1.
Also, these are the items that are different from the standard zetec.
1. The head had has different valves and flows better than standard
2. The water pump is a higher flowing pump
3. Engine internals can handle ~375-400HP
4. Intake manifold is a reworked version of the early 2000's plastic one
I am sure there are more differences but this is all I can remember off the top of my head.
Plus if you are going for an exact RS replica it is just another part of the puzzle.
|12-11-2012 03:41 PM|
There in the junk yards in Mexico as well .... My question is why mess with them , in most cases you can build a Zetec (which is th same things) for what most want for them used and shipping
|12-11-2012 03:07 PM|
|12-11-2012 03:03 PM|
|ah1f39||Capaldi has RS turbos and minfolds thrown in a large pallet box on their shelf. I've seen them myself. Along with partial JRSC kits. Contact Tim.|
|12-11-2012 01:58 PM|
|SVTisRight4me||probably a junk yaard in the UK|
|This thread has more than 10 replies. Click here to review the whole thread.|