|12-06-2012 08:04 AM|
|Egz||And if you wanted to be technical, the bottom piece really isn't a mount, but more of a roll restrictor. But calling it a mount is okay.|
|12-05-2012 08:32 PM|
|12-05-2012 07:46 PM|
|ranger97||I have a 2011 5 speed. I want to remove the battery box and the metal plate underneath ("reinforcement") to inspect the area. However, it looks as if there is something bolted to the plate that is suspended from it. Is this the transmission mount and how can I safely take the plate under the battery box free?|
|11-23-2010 01:58 PM|
|felixthecat||What mount are you needing or trying to replace? The bottom one is a roll restictor, in that it resticts the motor from rolling back & forth. Other words know as a ''Dogbone" cause of it shape. then you have two on top, one on the drivers side under the battery box. And another on the passenger side party hidden by the Degas bottle. If your replacing the Dogbone, upgrade to the poly mounts one.|
|11-04-2010 05:46 PM|
I noticed the Anchor Transmission Mount (picture in post) has a different rubber center section than stock Transmission Mount.
Is this design / mount worse than stock?
Is it better to purchase an OEM Ford Transmission Mount?
|11-04-2010 04:05 PM|
|myfafp3||the mount that cambrian posted is part of the trans mount|
|11-04-2010 03:40 PM|
|warneej||There are only 3 mounts on the focus. The passenger side motor mount (not pictured) and the two that you pictured in post #2.|
|11-04-2010 10:32 AM|
|cambrian123456||But, perhaps that isn't a transmission mount as here's a picture from a fellow on focaljet who broke his transmission mount:|
|11-04-2010 10:30 AM|
|Jgrove998||^Right. The transmission mount is under the battery.|
|11-04-2010 10:27 AM|
Ah, finally found some pictures at Partsource.
Here's the transmission mount:
Here's the lower engine mount:
|This thread has more than 10 replies. Click here to review the whole thread.|