|11-27-2012 03:38 PM|
i did full poly in the rear of my car... that with coilovers = fun in the corners!
If you need help let us local boys know. im prob within 15 mins of you.
|11-27-2012 03:13 PM|
Freemind, how did it work out for you? Are you pretty satisfied with how you did it?
As for me I'm pretty content with my current handling so major changes from stock are unlikely.
|11-27-2012 01:39 PM|
I did the same thing FWIW
|11-27-2012 12:23 PM|
|gondorian||I'm not changing the sway bar. I am running low on funds for car parts and I'm just doing the more important things first and then extra fun stuff will have to wait until next summer. Since I had to get new end links for the sway bar the poly bushings were only like $10 more so I just decided to get them.|
|11-27-2012 12:02 AM|
My Focus does have a rear sway bar. Are you changing the sway bars? The Eibach sway bar set I ordered comes with the poly bushings.
|11-26-2012 04:40 PM|
|gondorian||You might also want to try poly bushings. That is what I am planning on doing. I will let you know how it feels afterwards.|
|11-26-2012 04:38 PM|
|gondorian||If you just look underneath the rear bumper you should be able to see it. Here is a picture of mine. I know it looks pretty bad but it is coming off this weekend for my rear suspension job and I will fix it up|
|11-23-2012 11:06 AM|
|CoasterMoose||Haven't looked yet, I'm hoping to get it on a lift tomorrow so I can take a look.|
|11-23-2012 07:19 AM|
|FordNLNR||Did you look to see if your car came equipped with one from Ford? If so, what's the diameter? I'm curious.|
|11-23-2012 01:54 AM|
Thanks iminhell and viney, I found a set of Eibach 3588.320 front and rear sway bars with all the hardware and bushings on ebay for $149 including shipping. Helluva deal!!
Now I'll need to find someone in the Seattle/Tacoma area to install them, is there a link for recommended mechanics?
|This thread has more than 10 replies. Click here to review the whole thread.|