|11-18-2012 10:12 AM|
|11-18-2012 09:54 AM|
Throttle response isn't all it's cracked up to be. My car's response is very fast, 70mm TB and 12# flywheel. If I think of touching the peddle it revs to 3k. Trying to hold a low rpm is tough.
Other thing is I can't feel any gains after 1/2 throttle. That's because it's the point where the pressure drop to the manifold is already equal to atmospheric.
I honestly like a smaller TB better. I get more feel vs peddle travel. If I push it to WOT, it feels like WOT.
So I'm going to say to save the money you'd spend on the TB for the tuner/tune. It will benefit you more in the end.
Other things are full exhaust, cams, Lentec, raise compression ...
There are points where you'll need a larger TB. But 70% of the site is not at that point, not even me. Stock can flow lots of air. It's just one of those parts you replace because you can. Doesn't really do much for the car though.
|11-18-2012 12:58 AM|
|matmatician||Yeah, a tune is definitely gonna be a big help.|
|11-18-2012 12:40 AM|
Sent from my N860 using FF Mobile
|11-17-2012 09:40 PM|
Oh yea. Automatic. No clutch. I forget they make those newfangled things lol.
Throttlebody should still do ya some good though
|11-17-2012 09:37 PM|
Yup that lightweight flywheel will do a lot of good with an automatic
I'm gonna say a tune will help, besides the obligatory intake and exhaust of course.
|11-17-2012 09:35 PM|
|matmatician||CFM 67mm throttlebody and a lightweight flywheel|
|11-17-2012 06:30 PM|
improving throttle response.. need help / suggestions
ok so the title is basically self explanitory , now i do have an AUTO , so i dont really know what if anything can be done but im willing to do whatever itll take to improve the throttle response even a little , i mean its " alright " as in much better than it was stock but all i have for performance is the fswerks " street " with 2nd cat gutted ( not sure if the gutting did shit ) and a stealth mod intake. now i already have plans for 1 . header and tune , svt style dampers and ford racing springs . but thats all going to come in the spring . so for the time being i would like to work on throttle response , iv been looking into the cfm tb and have heard varying opinions on that , i would like a little more concrete info. but all suggestions are very welcome .
ps , do poly mounts do anything for this ? im not tottaly sure what they are really for .