Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - Reply to Topic
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum > Ford Focus Tech Discussions > General Technical Chat > I fixed my armrest for less than $5

General Technical Chat This section is for technical discussions relating to general maintenance, electrical issues, engine trouble, and recalls.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Thread: I fixed my armrest for less than $5 Reply to Thread
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
03-28-2014 10:43 PM
amc49 When you get inside that armrest it becomes very obvious what a piece of junk it is as supplied with the car. I modded mine long ago for probably around $5 as well and now it holds up pretty much all my weight when I lean on it hard. I cannot believe the parts pricing on parts for it, I used all steel and it will have to collapse the sides before it will fail now.
03-28-2014 09:20 PM
guy2545 I thought about trying to purchase this arm rest. to replace my broken arm rest. I have not done any measurement or planning, but it looks nice and just may fit.
03-28-2014 11:40 AM
Johnpnt
2002 focus armrest repair

I just fixed mine for 95 cents. Drill hole in broken side self tapping screw washer. Done in 15 minutes. Removed back plastic cap, two Philips screws removed drilled reinstalled.
01-11-2014 08:16 AM
Wiplash2000V6 I just got done doing this...worked out great.. now need to find out how-to fix the latch.
01-01-2014 05:02 PM
Leora83 Excellent. I love hearing about fellow cheapskate...I mean, thrifty...repairs.
01-01-2014 12:03 AM
redbuzz
Armrest pivot shaft repair

I too leaned on the armrest of my '06 Focus and broke the armrest. I lived with it for awhile then finally got ambitious and took it apart. I pushed out the metal shaft, put it in the vise then drilled and tapped both ends for machine screws. I put it all back together using Loctite and appropriate sized washers under the screw heads. I re-installed the trim caps. It's solid now and works as before.
11-13-2012 12:10 AM
Merrigan Great thinking! I don't know how long I would pass on the spring. Maybe check a hard ware store and you could pick up a beefy spring for under $1.
11-13-2012 12:06 AM
neamerjell
I fixed my armrest for less than $5

I have a 2007 Focus SE with this type of armrest:


I leaned over to pick something up out of the passenger floorboard and *snap* the armrest was wobbling and hanging on by one end of the pivot axle.



In the image above, you can see a metal bracket on the bottom and the axle which the armrest pivots on is covered by plastic circles on either side.

This is the axle that broke:

http://www.ebay.com/itm/NEW-FORD-FOC...-/230765466196


This guy has the nerve to charge nearly $30 for it.

The plastic end snapped off. I had already decided that Home Depot had the parts I needed when I saw the metal bracket had square holes under the circular covers.
* 1-3/8"x5 1/2" long lag bolt (has the little square under the head, then threaded all the way down, not a carriage bolt which is only threaded part of the way and lacks the square part)
* 4-washers (2 for each side)
* a thin lock washer
* a jam nut (not enough thread protruding on the other side for a nylon lock nut to grab onto)
Total cost: just under $5!

The end of the bolt and the jam nut won't allow me to put the other circular cover back on, but my armrest is reattached and it ain't goin' nowhere any time soon!

I saw another thread showing how to beef up the latch on the armrest lid with a spring from a stapler. I may do that next as the latch seems loose to me. Surely I can find someplace to buy just the spring; it seems wasteful to buy and cannibalize a perfectly good stapler.

I hope this info proves useful to someone else who is also a cheapskate, er on a shoestring budget like I am.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 08:06 AM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Audi S3, Ford Fusion and Acura TLX. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area. Challenger Hellcat - Charger Hellcat