|11-08-2012 12:00 PM|
Well, he's been talking back and forth with SCT and Don. He updated the firmware again and it does log a little. But that's it, a little. Last night I got 6min 43 sec.
Plugged my X2 in and tried logging with that, zero problems.
His X3 is kaput IMO. So I'm going to loan him one of my X2's for the time being.
But we did find out his MAF is pretty much pegged, as are his injectors. And we haven't touched spark yet, 42# and 80mm MAF.
Roughly what it's making for power.
Trans tune REALLY needs to be worked on. Fuel is pretty set.
Tom, you have email.
|11-05-2012 05:30 PM|
Basic same issue a lot of SVT Focus guys are having
There is a new GenII out if you would like a copy shoot me an email
|11-05-2012 12:09 PM|
dataloging problem ...
So last night I was trying to help a buddy tune his truck. We got it running a bit better simply by luck.
Problem is we couldn't datalog it.
We can log about 10-15 seconds and then the log stops. Try to reconnect and it won't.
Disconnect the OBD plug and wait a minute, re plug it in and try to reconnect. Nothing, still can't connect.
Then I'm not sure what we do. But after more time and doing something, we can connect again,,, for 10-15 seconds.
We updated everything, software, drivers, firmware. Same thing.
Tried logging through Gen II and LL 6.5, both kick a guy out.
Odd thing is while we're locked out we can scan for codes, none present.
I'm at a loss. He was going to call Don (who he bought everything from) and see what his idea's are. But I'm looking for a second opinion.
If any of it matters,
Vehicle: 1997 F-150 w/5.4 Lightning swap + mods on E-85 (KJJ3)
Software: Advantage III, Live Link 6.5, xCal III (3000 unit)