|09-22-2014 11:11 PM|
Add it to that reference thread for the next guy, that's how we can pass it on easiest.
|09-22-2014 11:07 PM|
Temp control assy.
Tear down the cable control end down by the heater box and the male end of a 1/4 inch ratchet will fit in the end of that flapper knob and will free it up quickly !! Ford would"nt or could"nt tell me that , but wanted to sell me a new box for almost "$500.00 ! REALLY ?? quick fix cost me nothing and found another "like new" cable at the salvage yard for $5.00 T.K.
|09-22-2014 10:59 PM|
|Tklein||Thanks for your reply; Amazing what you can fix when faced with an "OVERPRICED" factory part !! The male end of a 1/4 inch ratchet will fit in the end of that control if you tear it down to the box, and will free up that flapper quickly !! Yeah !! T.K.|
|09-22-2014 05:54 PM|
|sailor||There's a fair amount of info. in this "stickie", hope some of it may help you:http://www.focusfanatics.com/forum/general-technical-chat/302320-does-your-vent-selector-stick-have-you-broken-cables-read.html|
|09-22-2014 05:39 PM|
|NotReal||Sounds like you either have something gamed in there or it's rusted. Cause it should turn with little effort. And it is a pain in the bum to remove. Good luck.|
|09-22-2014 05:35 PM|
|Tklein||Ford wants to sell me a new heater box for 450.00$ NOT ! Just trying to figure out a way to get that knob to turn hot-cold ! Cable broke because knob on heater box would"nt turn ! So replacing the cable assy. won"t fix the problem, even though I need a new assy. ??????? T.K.|
|10-14-2012 07:00 AM|
I suppose a picture tells a thousand words. I've taken the connector off (red arrow). The black knob (green arrow) will not turn. Anyone know what this could be?
|10-13-2012 09:22 AM|
I've taken the cable off both sides (at the selector knob and underneath the drivers panel) and I can see that it is fine and turns OK.
It's the little stalk that the connector connects to under the driver's panel that won't turn.
Anyone know what I can do here? Is it possible to manually move the heat door more to the heating side? It's currently stuck on the cold side.
|10-04-2012 06:12 PM|
|RugbyMadNut||mmm... no one seen this before? I'm not seeing much on google searches so I think it might be rare enough.|
|10-04-2012 07:18 AM|
|RugbyMadNut||Just having a search on this... could it be an alignment issue. That is, the knob is "bottoming out" prematurely and needs to be adjusted?|
|This thread has more than 10 replies. Click here to review the whole thread.|