|10-10-2012 08:39 PM|
Invest in one of THESE, and a big deadblow hammer (don't use a solid hammer or mallet) and the job will go much smoother.
I've done spring and suspension installs on a variety of vehicles, and the Mk3 Focus is definitely not the toughest job I've done. It just requires some attention to proper procedure.
Regardless, a spring install is not a job that I would recommend to the novice mechanic. Torque specs are critical, and you're dealing with components that, if installed incorrectly, can kill or injure yourself and others. Just keep that in mind.
|10-10-2012 08:04 PM|
|10-10-2012 12:39 AM|
|bedoya_d94||Taking it to a local shop they usually charge $80-$100 per wheel so you'll end up paying around $400 for the install (not worth it). I'd try to see if theres another person on the FF forums that lives around your area if they can help you out. Thats what i did|
|10-09-2012 11:39 PM|
|_RED_||As long as the springs are designed to work with your mk3, the install isn't to hard. Just time consuming. Took me a few hours because the slip struts ford use are a pita! Lol|
|10-09-2012 11:33 PM|
|10-09-2012 11:29 PM|
How hard is it to install a set of lowering springs?
Ive seen a couple threads about springs being put on, and i just went surfing my local craigslist and found a guy in my area selling a pair of new eibach sportlines for 50 bucks, so i decided to jump on it. Should i take it to a shop or is there anyway a moderatly car savvy person could put these on themselves?