|07-20-2015 09:02 PM|
|Nizmo6||Forgot to share:|
|07-20-2015 01:14 PM|
|ChalupaJones||This should be stickied, mods.|
|07-20-2015 12:20 PM|
Buy Trim Pry Tools!!
Just wanted to add for those looking at doing this, buy some nylon Trim Pry Tools (harbor freight #69668 $7.99). Save your self from breaking a tab on a $25-$XXX trim piece. I was trying this with the tools i had at home, couldn't get the first trim piece up, trim tools only took 20min a piece.
|06-02-2014 10:48 AM|
How did you get the A/C panel out in the first place?
|06-01-2014 09:10 PM|
I got the ac panel out but can't get it back in. Is this side panel the reason for it? Just seems like the clips won't go in
|05-24-2014 02:07 PM|
just noticed all the pictures in the first post are gone
did anyone save a copy or Chickenmuffin can you edit it?
|05-10-2014 09:38 AM|
|TheHumbleGeek||Double check your electrical connections...|
|05-10-2014 12:20 AM|
|Papo_Wii||Question that I have. I take everything out and when I get everything back together my airbag light still on. Anybody else have that issue?|
|04-22-2014 09:40 AM|
|TheHumbleGeek||Sorry mishka, missed your last posts! To get the shifter bezel out, you have to pull kinda firmly where the clips are in each corner. If you have a plastic trim tool, it really will help. I don't, but when i was pulling up, the gear indicator popped out and i used that to pull up on the bezel until i was able to CAREFULLY slip a knife blade under the silver bezel. I used the blade to put alittle pressure on the clip while i pulled up from the bottom of where the shift boot is. It will eventually unclip. Mine did so rather suddenly and at first i thought i broke it. I checked and it was fine. Once you get that bezel out, you should be able to get the climate control panel out.|
|04-22-2014 08:31 AM|
|mishka||I did it, except for I can't get the A/C panel or shifter panel out (automatic)|
|This thread has more than 10 replies. Click here to review the whole thread.|