Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - Reply to Topic
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace


Go Back   Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum > Ford Focus First Generation > ZETEC Performance (2000-2004) > Most bang for the buck modifications?

ZETEC Performance (2000-2004) The place to chat about any 2.0L Zetec engine performance, tuning and exhaust related upgrades.

Search This Forum | Image Search | Advanced Search    
Ford Focus Tire & Wheels FocusFanatics Merchandise

Thread: Most bang for the buck modifications? Reply to Thread
Title:
  
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Additional Options
Miscellaneous Options

Topic Review (Newest First)
09-30-2012 03:26 AM
GO.army.1969
Quote:
Originally Posted by robinson07focus View Post
Looking to change wheel and tire size and speed rating but having trouble finding a way to remove the speed limiter for my 07
You need to get a tune that will remove the speed limiter
09-29-2012 10:44 PM
robinson07focus Looking to change wheel and tire size and speed rating but having trouble finding a way to remove the speed limiter for my 07
05-14-2011 04:54 PM
iminhell Around the 150whp is where the stock injectors are about done, they say.
But there are ways around that, higher fuel pressure. But that has drawbacks too and doesn't raise the bar much. But it's not like you're always making full power either.

Cams, exhaust and good suspension makes for a pretty fun car. And that's about as far as $1,000 goes.
05-14-2011 06:40 AM
Paul P At what point do you have to go with bigger injectors? The stock 19lbs/hr are only good to support 130HP at the crank. I am sure that 160HP at the wheels requires more injector.
05-07-2011 09:30 PM
Paul P I does have a 3 angle on it. I've already tuned it with a WB O2. No other way would be acceptable. At the moment it runs pretty hard for what it is. Have 2 free tunes left from the shop I tuned it with so when I drop the cams and springs in it I'll get it tuned again. I have an SCT 3015 tuner for the car.

Thanks for the reply.
05-07-2011 10:27 AM
focusmaniaczx3 awesome! you may be held up by the flow of the head a little but you should be able to hit the 160whp mark. maybe mill the head a little bit more if you have it off (an additional .010" should put you slap in 93/91 octane only territory) and it should be good to go. oh i forgot to mention anything about a 3 angle valve job. those tend to help out pretty good too. have fun with that nitrous. please be safe with it too, get a good tune, use a larger fuel jet than the nitrous jet, and absolutely must have a wideband air/fuel ratio gauge.
05-07-2011 08:14 AM
Paul P Ported the head myself. MAF readings during the first tune were indicating about 8-10% more airflow over stock. This was a noticeable seat of the pants improvement. It was milled as a std cleanup procedure only .010"-.015". Yes it will have the Crower springs and titanium retainers. Adjustable cam gears will dial in the cams too. As the last upgrade before the N2O kit.
I been doing this stuff for a while (25 years).
At 46 people do think I should be driving something else but hey these cars are a blast to drive and I don't care.
05-07-2011 03:41 AM
focusmaniaczx3 HA! lookie what i found. this is basically the same chart i was looking at in my ford racing book. according to THIS one the numbers were made on an engine dyno. which basically means this is how much power the car has at the crank, not at the wheels. subtract 15-25 hp from the numbers there to take into account power lost between the crank and wheels. 10-15whp for a manual 20-30whp for an automatic would be better.
http://www.newcougar.org/forums/atta...9/40349.attach
05-07-2011 03:33 AM
focusmaniaczx3 65mm TB, ported IM, CFM UDP, MSD coil and wires wont add up to more than a combined 5whp tops. the coil pack is completely useless other than for looks and the other 3 will make more of a difference on throttle response. if you are shooting for the most WHP for money spent i would port the stock TB and IM and not buy the UDP kit at all. for the record the stock coil is good for well over 700whp. that goes for the wires as well.

the power you make will depend ALOT on what is done with your head. if it is a stock head that gets taken to a local machine shop then i wouldnt expect a whole lot since they probably wont do the best job in the world. its just the way it is, not alot of machine shops will spend the time to get the most flow out of a head unless they already know how to and since a focus head probably doesnt come to them very often, chances are that they wont. i dont know about your area but around here if you walk in with heads from a small block chevy or ford v8 you can get them done great any day of the week. same goes for pretty much any honda head. now if you walk in with a zetec head you definitely get a WTF? kind of look and are lucky if they even agree to mill it let alone port it.

its also important to know how much compression you will have. will you mill the head for more compression or leave it at stock compression? more compression = more power but also means you will HAVE TO run higher octane fuel.

will the head have larger valves than stock? will it have upgraded valve springs? with the amount of lift of the crower 2's it would be advisable.

SVT header will add 15whp PROVEN on open header, the 2.5 inch exhaust might hold that number back some however. the more you can open up the exhaust after the header the better off you will be. free flowing exhaust is best for higher rpm power which is where you will be making your power with those cams too. IF you can or if you have the option try and get your exhaust done in 3in. the 1/2in might cost perhaps 2-5 whp on the top but that is purely a guess.

the nearest i can figure by looking at an old ford racing book on how much power FR stuff is good for you might be looking at a total of 18whp and 10wtq from the head if it is done correctly or is a FRPP head or equivalent. maybe 15whp and 5wtq from the cams.

so in review 15whp header + 18whp head + 15whp cams + 5 from intake = around 53whp increase POSSIBLY. it could come out to more with extra compression and it might come out to less if your bottom end is completely worn out.

hope that helps. i still think that is ALOT of money to wrap up in 50whp when i can make twice that much of an increase from a $500 nitrous kit and still have my torque too. good luck and let us know how it turns out! dyno videos are always nice to watch.
05-06-2011 10:11 PM
Paul P
Quote:
Originally Posted by mlbbaseball View Post
a JRSC will cost u a full 2k after tuning unless you get the base kit w/ the black box. then it will put you in the 160 range for 1200.

YOU WILL NOT reach 160 for under 1200 bucks any other way than Nitrous or a JRSC. hands down end of story.
What will I have with a ported head, 65mm TB ported 2001 intake, CFM UDP kit, SVT MAF and intake setup, MSD coil/wires, SVT header w/2.5" Exhaust, ORP, Crower Stage 2 cams and a tune I won't hit that number? Can you can give me guesstimate with your experience? I sure someone has done this before.
This thread has more than 10 replies. Click here to review the whole thread.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 11:30 PM.


Copyright 2002-2014 FocusFanatics.com. All Rights Reserved : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Audi S3, Ford Fusion and Acura TLX. You can find all Ford Focus and Focus ST related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area. Challenger Hellcat - Charger Hellcat