|05-10-2013 08:54 AM|
Latest update: pulled an overhead console from a 2005 ZX5-painted it black and added a special feature...
Wired in a Homelink GDO inside the console.
|02-01-2013 11:11 PM|
Ford Contour SVT plus a CAI. Probably 200ish at the crank 175 whp but that's a guesstimate.
Posted via FF Mobile
|02-01-2013 09:52 PM|
|pzduzit||Those are nice wheels. What is that motor out of?|
|01-29-2013 08:48 AM|
Sent from jeremy's iPhone using FF Mobile
|01-29-2013 07:30 AM|
Diving headlong into the cruise control install-first thing was to pick up some parts and determine how to install the servo.
What $45 gets you from Picky Pull-not pictured is the clock spring as I already installed it.
Looking at things under the hood-it's pretty tight in there and there is no way this is going on the firewall. Also see some extra wires from an earlier fog light install.
Looking at this large wire loom I figured I could probably route the cable from the cabin into the engine bay.
The other end...
Carefully snaking it through and this is what I have.
Matches up at the business end like it was supposed to be there.
Had this lying around...
and fabbed up a bracket...
Once I started on the wiring I determined that I needed a few more Picky Pull treasures-a 4 pin clutch position sensor (mine only has two) and a brake position sensor (missing) and associated wiring.
I have the 10 pin plug from the cruise servo wired with extensions now it's time to start splicing in as needed.
That's it for now-will update as things progress.
|01-23-2013 06:53 AM|
I'm not sure if this is someone here but I found these videos very informative.
|01-23-2013 12:02 AM|
|04ZTSJelf||This car is SICK!|
|01-22-2013 10:26 PM|
|sleepyboy||Man this car is everything I've always wanted in a focus. Really hope I get to see this thing in person.|
|01-22-2013 10:22 PM|
|beatmaniac1||Sick car !! Good luck for the upcoming mods|
|01-22-2013 10:21 PM|
|6SPD_soul||You're going to have some fun installing cruise control. Congrats for diving headlong into it though, you're probably capable given how confidently you've taken the car apart to this point.|
|This thread has more than 10 replies. Click here to review the whole thread.|