|09-23-2012 03:43 PM|
|09-20-2012 10:55 PM|
My 55w ballasts were PLENTY bright. Also, a decently straight cutoff.
|09-10-2012 05:35 PM|
|gtferrari||i have 55 watts and still wish i had more cowbell. errr i mean light.|
|09-09-2012 08:04 PM|
|King Hoonigan||Mine are actually surprisingly bright, MUCH more than stock and look alot like the projectors in that bottom pic. No hid's or anything like that. I dont know if theres any difference in who you bought them from and all that, seeing how theyre all the same thing. The only thing i really had to do was adjust the cutoff up some because theyre pointed pretty low out of the box.|
|09-09-2012 12:59 PM|
|Slammed_2.0||my projectors are a straight line with no mod and with Morimoto equipment. =]|
|09-08-2012 09:56 PM|
Found my fix while I was looking for the link to the washer mod. Some eagle eyes the washer mod isin't needed. See this thread and what turned out to be my issue as well.
If you need the washer spacers check out this specifically pages 10 and 11.
When I installed I just assumed I needed the washer mod. Test before mod! :)
|09-08-2012 11:25 AM|
|Baldurs390||and does any one have alink to the 2 washer method???|
|09-08-2012 11:24 AM|
|Baldurs390||i have 55w 6k bulbs and my cut off is close to the 2nd picture|
|09-08-2012 10:54 AM|
|GN Prime||how many watts is your hid kit? i know all the slim ones (which i have also)that i came across are 35w. the normal ones are 55w. i have noticed that mine aren't as bright as they should be, but that's because of the wattage. there are a few threads around here that show some good pics. and also my cutoff is like the 2nd pic too:)|
|09-08-2012 10:46 AM|
yyeaahh my cut offs look like the 2nd pic with hids.
|This thread has more than 10 replies. Click here to review the whole thread.|