|03-13-2013 07:47 PM|
|Mrlandy||I tried D and G and there was really nowhere to hide any glueing mistakes. Mounting on the top (E) completely hides the glue and wires. The GOOP auto epoxy will make sure you never have to worry about the LED strip falling off.|
|03-13-2013 07:13 PM|
|Bliky||I've always been a big fan of the way E would look. If you look at it at night it looks like the car has an angry face with the headlights off and just the DRL's... The factory HID's and the Euro Headlights have a strip light that I believe.|
|03-13-2013 07:08 PM|
Take a look at my MOD here. I put them on top under the black housing.
|09-08-2012 01:12 PM|
If you are wondering what "E" would look like. Look in my headlight mod thread. I have already done it. The problem I ran into was the LED's prevented any adjustment of the headlight reflector. It was hard to take them back out because they looked so good.
Edit: Linky to my thread.
|09-08-2012 10:29 AM|
I think D would look more ebay in person, and I've never really been too fond of the way Audi implements it. E is pretty close to what comes in some Foci factory.
B, C, and G are pretty cool. It all depends on what you like! Some photoshopping might help you make up your mind before committing.
|09-08-2012 09:48 AM|
|starfuryt550||D, E, F. In that order! Too much can be too much!|
|09-08-2012 09:39 AM|
|BaconZombie||I would say D minus the small portion that goes up the side on the outside edge.|
|09-08-2012 04:16 AM|
I like D or E. Maybe a little more for E.
I wouldn't wrap it around the entire lamp. I work with a guy who wrapped the entire lamp on his Mazda 3. I think it looks way over-done.
One strip is subtle enough.
|09-08-2012 03:46 AM|
Need opinions for LED DRL's
I need everyones help! I can't make up my mind on what pattern I should do. I do really like 'D', because of it's audi'ness. But I also like C E and G
Or I was thinking of wiring each strip of LED separately to a bank of switches so I could change it on a daily basis... And perhaps take out the sidelight and use that as a tunnel for the wires to egress the headlight housing.