|09-07-2012 08:07 PM|
|burke_024||lmao at this thread lol hahaha|
|09-07-2012 06:59 PM|
|bespurcell||The hx35 turbo has been used on many 4 bangers with good results. One of the sport compact magazines did one on a 240 a few years back for around $2k. They used junkyard parts. It made 266 hp at approximately 5500 rpm and 271 lb-ft of torque at around 5k. This was with only 7 psi and crappy junkyard parts.|
|09-07-2012 11:29 AM|
|09-07-2012 11:27 AM|
for me its someone trying to take a massive truck turbo and slap it on a 4 banger
not to mention maybe one of the turbos they put on semi's
|09-07-2012 11:10 AM|
all i have to say is that some people on this forum are complete idiots... notice when they get pwned they dont come back...
anyways yes, build your motor and get this on there. see what kind of power you can push. this should be a nice build if you actually do it.. :)
|09-07-2012 10:31 AM|
A Hx35 will come up quickly on a 4cylinder with a proper manifold. What housing is on it? A divided t3 would be ideal for a street car with that turbo. Also, which compressor wheel does it have?
That turbo doesn't get happy until 30psi though. :D
This is a good read on the Holset line up.
|09-07-2012 10:24 AM|
|Redzx||I believe he said it was an holset he35 it came off an 04 dodge cummins its setup to run 20psi|
|09-07-2012 09:10 AM|
|1badsrt||What cummins turbo is it?|
|09-07-2012 09:05 AM|
|1badsrt||Me and my brother built a 03 focus sedan stock split port motor with a garrett 20g turbo it is automatic with a lentech trans tuned on aem fic and my stock stage 2 srt injectors on 10 psi and it rips. But and am doing a borg of some type on it this winter.|
|09-07-2012 09:02 AM|
|1badsrt||I have a srt-4 with a borg warner s366 it spools just fine..... Hi buddy^ lololol|
|This thread has more than 10 replies. Click here to review the whole thread.|