|09-06-2012 10:16 AM|
|09-01-2012 10:58 AM|
|David82st200||Thats only with 3.4 psi|
|09-01-2012 10:26 AM|
|z28forlife||I bet it felt pretty good with 190hp. Thats 50hp more than stock.|
|09-01-2012 04:00 AM|
It was the Bypass Valve now its working fine.
I had it on the dyno because i couldnt find an tune for the powerworks in Germany.
And when you see that engine makes 190 bhp with this minimum of boost im sure that it will make with the full 13 psi much more then the 230bhp from the powerworks tune.
|08-31-2012 09:44 PM|
What live mapping are you doing , a pis poor tune will do this as well
|08-31-2012 03:57 PM|
|David82st200||Have i to remove the complet charger or only the Upper half?|
|08-31-2012 03:27 PM|
|StockTalon||Bypass valve is stuck open. Pull the blower off and see why it wont shut.|
|08-31-2012 03:26 PM|
|David82st200||How can i Check it?|
|08-31-2012 02:29 PM|
|thenorm||bypass valve leaking?|
|08-31-2012 02:24 PM|
only low boost with powerworks sc help please
hi guys i need some help with my powerworks supercharger.
its fitted to an 2 liter black top zetec. today i hat it to a live mapping and result the was very bad it made only 3,4 psi boost and 190bhp.
the powerworks kit is new and was never fitted before and should make 13 psi.
the belt is fine and there are no air leaks on the charger.
can anyone tell me where the problem is?
regards from germany