|09-11-2012 01:59 PM|
|Michael_Price1990||well i might go with them then. does not sound to bad. my mounts don't have much time left. almost 10 years old i'm amazed there not falling apart yet lol|
|09-11-2012 01:57 PM|
^^ same here
I have a cfm lower for awile now and Vf Engineering passenger side and driver side mount. The passenger side now is good. But the driver side now I do not suggest, bad design.
When I installed it I couldn't even get the top center nut torque to spec because they only made it about a quarter inch deep so it rounded right off with the correct size 6 point socket
When I go to pull the motor and tranny. I'm going to have to b* to get another... but only if they'll Milll the nut deeper
|09-11-2012 01:46 PM|
You will notice it in the steering wheel. It will prob be slightly different for each car but I know in mine there is a slight rattle of something coming from inside the dash at low rpms. My drivers side mirror also vibrates at idle but stops as soon as you get moving in a gear. The mirror on the windshield also slightly does but not that bad.
It's also a little noisy but you have to figure the point of the mounts is to not lose power due to engine movement so stiffer mounts means there will be more vibration sent to the chassis.
|09-11-2012 01:35 PM|
|Michael_Price1990||what vibrates like crazy? just the steering wheel? i have a 30 min drive to work and back daily.|
|09-11-2012 01:33 PM|
|SVTFocusOnMe||It will vibrate a lot. If your worried about it ruining the comfort of you DD I would steer away from them. It only bothers me occasionally. Every other time I just think "because race car" and I feel better. Haha.|
|09-11-2012 12:55 PM|
|Michael_Price1990||When you replace all 3 mounts is the in car vibration pretty bad? or not really a big deal? ive considered switching myself. but ive always turned away when i read the warning for daily drivers and bad vibration|
|09-11-2012 12:49 PM|
|09-06-2012 09:31 AM|
|08-30-2012 09:33 PM|
|felixthecat||Thats great to see companys are making right w/ their products, & trying to figure out why it failed.|
|08-30-2012 03:41 PM|
Please email me at firstname.lastname@example.org so that we can get some feedback on how/why these failed. We are always looking to improve our set-up and would like to look at your particular case and examine what may have happened.
Looking forward to hearing from you soon.
|This thread has more than 10 replies. Click here to review the whole thread.|