|08-19-2012 08:16 PM|
It's got a ford forged crank, before they switched to the cast ones, Mahle pistons and forged I beams but I forgot what brand because I build the block a couple years ago.
I have stage 3 ported c heads and a ported boss 260 intake too. I'm thinking of making it a short runner.
|08-19-2012 12:47 PM|
|08-11-2012 02:30 PM|
|2005zx4thewin||Adjustable cam gears allow you to shift your power band either direction, u could add a cam kit to really widen your powerband, along with shorty headers and full exhuast, with a short ram or cold air intake, you could really do work on your powerband as far as tweaking goes|
|07-19-2012 10:46 PM|
The engine is a 2 liter 4 banger, low to mid-range torque is gonna be hard to come by. I really don't know much about this engine but I would assume that the most torque you'll pull out of it at usable RPMs could come from a supercharger or stroking/boring the engine.
If you put a supercharger on the engine, it would have a good increase in torque and horsepower throughout the entire powerband, but especially more-so at lower RPMs (compared to a turbocharger or N/A mods).
If you were to bore or stroke the engine, you would increase the displacement, so the engine would go from a 2.0 liter to, say, 2.3 liters. If the Focus puts out 159hp and 146tq at 2000cc stock, or 79.5hp/L and 73tq/L, you could assume that another 300ccs would boost those numbers to 183hp and 168tq. Those numbers are definitely just predictions. But still, a theoretical extra 22 ft lbs of torque would be helpful and would most definitely be felt at the low and mid-range.
My advice for right now-- wait for others to lay the foundation for mods and prove the reliability of them.
|07-17-2012 10:26 PM|
|07-17-2012 04:58 PM|
|07-17-2012 04:56 PM|
Makes a nifty paperweight tho!
|07-17-2012 03:21 PM|
|07-17-2012 01:46 PM|
|07-17-2012 12:01 PM|
|JL330||Tb = throttle body. It's just a spacer between the throttle body and intake, I honestly don't see it being too beneficial. Shorty header is an exhaust mod, it goes before your catback and bolts to the head. I haven't seen any testing done on these with our cars though. It's all speculation at this point, none of us really have a clue what these things are capable of, especially with stock internals. We'll see more go fast goodies when the warranties start expiring.|
|This thread has more than 10 replies. Click here to review the whole thread.|