|10-17-2012 12:59 PM|
|freemind||It's metal. The Foci OEM is plastic.|
|10-17-2012 12:30 PM|
|Superlifted06FX4||What is the big deal with the "tour cover?|
|07-11-2012 02:14 PM|
I don't get why everyone spends so much damn money on theses things.
Valve cover - http://goldcoastautomotive.com/cgi-b...ive&item=48492
Valve cover hard wear - http://goldcoastautomotive.com/cgi-b...ive&item=48494
Valve cover gasket - Felpro VS 50460 R
Spend $10 on some high temp spray paint and paint it yourself.
|07-11-2012 11:10 AM|
|LouBomb||And massive if you send back the core they deduct 100 bucks... so you really pay 160~ for a powder coated vc.|
|07-11-2012 10:04 AM|
|07-11-2012 10:03 AM|
|Sniperx||I not only bet it will work, (and yes use a new gasket) but think it looks Uber Cool!|
|07-11-2012 03:14 AM|
|J0EC00L||I bought the same valve cover from ebay same seller. You need the kit from massive speed to install that on a focus zetec. I made the same mistake and bought it without checking on it. You can get the massive speed trophy valve cover kit and it comes with the install kit for less than buying that cover on ebay and buying the install kit separate. Just call massive speed and they can get you one in any color you want with the install kit.|
|07-06-2012 05:43 PM|
I bought some header bolts from Summit Racing. I haven't had a chance to install them though.
|07-06-2012 05:09 PM|
|zetecDon||He meant to call Tousley Ford and ask for Steve to get the bolts you need.|
|07-06-2012 03:02 PM|
|sgtsmasher||i looked all over the website and could not find header bolts, the ones that go into the front of the motor, i see all kinds of junk heat shield stuff but i dont see bolts...do they sell them there, and has anyone checked the website i posted to see if any of those would work cause there priced really low|
|This thread has more than 10 replies. Click here to review the whole thread.|