|01-23-2017 01:54 PM|
This was a great write up and inspired my first modification!
|09-12-2015 09:27 AM|
|09-11-2015 02:05 AM|
|09-10-2015 11:42 PM|
I just grabbed what looked like it would work at the time.
When I first did this project, I didn't know Ford had a specific bolt/nut for the fog lights. I just grabbed what looked like it would work at my local hardware store. For the record, I never thought this thread would continue on as far as it has. Kind of neat to see other people chip in their ideas, and thoughts to this project. It's amazing how many people have visited this thread the last couple of years.
|06-16-2015 09:49 PM|
|ChalupaJones||I gotcha, I skimmed through it before I posted and sense I don't have very good signal at work pics don't always load. Anyway, yeah no offense taken, it's just easier to ask a simple question than trying to sift through a humongous DIY thread.|
|06-16-2015 12:10 PM|
|Tiger-Heli||Didn't mean to be so harsh, but Chaddz3 did a GREAT job in the first five pages laying out how you would add fogs to a Focus (or really any car) using a pair of relays. The last pages of the thread do a good job explaining how to get it to work with the factory switch and Focccus software.|
|06-16-2015 10:26 AM|
Thanks for the info, I did. Didn't have time to read through the entire thing though while I was at work. Thanks
|06-16-2015 07:11 AM|
Did you actually read the beginning of the thread?
(4) 1/4 - 3/4 1/4" x 3/4" Cap Hex Bolt
(4) 1/4 - 20 1/4" - 20 Locknut with Nylon Insert
(4) 1/4WSHR 1/4" Flat Washer Local Hdwre Store
|06-15-2015 10:37 PM|
I can get my hands on the oem ones no problem, just figured I'd check to see what I need. If I get the oem ones do I need to get the nut for them as well?
|06-15-2015 09:03 PM|
|TheHumbleGeek||Hey jonesy.... Two bolts per housing, should be t10's I believe, though im not 100% confident on size...|
|This thread has more than 10 replies. Click here to review the whole thread.|