|10-29-2013 04:23 PM|
|10-29-2013 04:21 PM|
|10-29-2013 04:01 PM|
|macdiesel||I'm guessing for a track car, not having fuel and brake lines under the car might be beneficial.|
|10-29-2013 03:17 PM|
|Eastwood||I am wondering, what is the reason to relocate brake lines ?|
|10-29-2013 02:29 PM|
|Blue5ive||Coming along nicely.|
|10-29-2013 02:23 PM|
Brake lines are now all fitted for the most part.
For the rears I used an existing bolt location so part of the line had to be pre-bent before it was put into the car while the second part was bent and flared after:
Here is where it comes through:
I ran the main electrical through the car now as well. It will come up to one of the center air vents where I am going to have my master cutoff switch. It then goes through the firewall where it will end up near the standard batter location where I am going to have a central hub.
|10-29-2013 02:22 PM|
I figured while I have everything out, why not fit a new pump as I don't know the mileage of my other two pumps.
Comparison of how close the Deatchwerks (dw65) pump is to oem: (even the rubber covers fit)
Modified Fuel basket:
Back in place, hopefully I can get the lines to fit in there so I don't have to raise the cover to much. I will Probably use some type of rubber seal so fumes don't enter the car:
|10-29-2013 02:21 PM|
Well Since I am waiting for parts I decided to do another update earlier than what I was going to:
rear suspension changed out:
New fronts being created:
Painted front carriers because they developed surface rust:
AN fittings added for fuel delivery and return, this is the second one I had to do because the first version I did lacked the spring bars. :screwy:
All my front lines are now bent just deciding how to go about doing the ones through the car and to the rear because of the difficult bends.
|10-15-2013 10:49 PM|
|fasfzr||crazy build but I love it|
|10-15-2013 07:55 PM|
also for the splicing connecting - it is sucks if you will be soldering it - turbo location will make it go away and just connecting wires by twisting also can be bad because of the heat in that area- I am not sure how to deal with it for now
|This thread has more than 10 replies. Click here to review the whole thread.|