|06-28-2014 10:27 PM|
|HiroBerh||I did notice it hangs a little bit down at the beginning pipe to the first clamp.|
|06-24-2014 11:29 PM|
|HiroBerh||Yeah, I realized I forgot to seal the tube where it is at the axle. Also, yeah, I got the heatshield rattle but it seems gone now and I removed the middle metal bar.|
|06-24-2014 11:00 PM|
|b.pearson||None on mine, I did have a problem with the Stealth can hitting my heat shield but I was able to just bend the shield out of the way|
|06-24-2014 03:28 AM|
|06-23-2014 11:49 PM|
|HiroBerh||I have the stealth exhaust. Does anyone have any rattling with the race or stealth system? I think mine is just vibrating a little on the middle bar thing that doesn't hold anything.|
|06-23-2014 01:00 PM|
Duratec and Zetec only.
|06-23-2014 08:53 AM|
|Spender||This Fswerks Race Exhaust works on Ford Focus 1.6 T.D.C.I 2009? :)|
|01-18-2014 07:15 PM|
|b.pearson||I've ran slip on exhaust on every car I've owned and never had a single problem, you just have to do it right and make sure the hangers are in good condition. If you do it right and seal everything you get the same result as you would if you got it welded but for like fifteen bucks between clamps and sealant. It's a complete bitch to take apart though|
|01-18-2014 10:52 AM|
I they're slip on exhausts. And not flanged.
Anyhow I want a center exhaust so I will not be going with your suggested ones and when I looked through the thread I didn't understand why people didn't just post the English link for the site.
|01-18-2014 08:58 AM|
|This thread has more than 10 replies. Click here to review the whole thread.|