Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum - Reply to Topic
Ford Focus Forum
HomeContact UsAbout UsGalleryDiscussion ForumsMarketplace

Go Back   Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum > Ford Focus Third Generation > DURATEC Ti-VCT Performance (2012-Current) > MS3 & MK2 parts that fit the MK3 Focus

DURATEC Ti-VCT Performance (2012-Current) The place to chat about any Duratec 2.0L Ti-VCT engine performance, tuning and exhaust related upgrades.

Search This Forum | Image Search | Advanced Search    

Thread: MS3 & MK2 parts that fit the MK3 Focus Reply to Thread
Send Trackbacks to (Separate multiple URLs with spaces) :
Post Icons
You may choose an icon for your message from the following list:

Register Now

In order to be able to post messages on the Ford Focus Forum, Ford Focus ST Forum, Ford Focus RS Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
What I Drive
Year, color, and model of your car. Example: 2003 Focus Centennial Edition Sedan
Your real name.
Please select your insurance company (Optional)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Additional Options
Miscellaneous Options

Topic Review (Newest First)
12-09-2016 10:38 AM
Originally Posted by Slo86GT View Post
A friend of mine locally is upgrading the exhaust on his 2nd gen MS3 (2012). I'll be getting this from him to see how it works on my hatch. It sounds fairly burbley on his car, I can hear him pull up from inside my home. Should be pretty throaty on an N/A car.
Never updated this. Here it is. Been running this exhaust about 3 years now.

YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.
12-09-2016 03:00 AM
Oliternal Would someone know if the flywheel/clutch of the mk2 fits in the mk3? I've been itching to perform the operation and I've done a bit of research that would lead me to believe that they should. Better yet, would an ms3 flywheel/clutch be a good fit?
08-05-2013 03:53 PM
Originally Posted by asting View Post
Notice how the stock versions are not the same? I replaced my stock RMM today, and expected the 3 hole version. it only has one hole along the bottom. I'm not sure how much of a difference the electric focus mount made. It seems better, but maybe it's just a placebo.

So it appears we have at least 2 revisions of stock, or maybe the sport package/trim level alters that?
Yours looks just like my old one I took off the 2013 after I filled all the holes though with Polyurethane to put on the 2012. The 2013 now has the FE RMM...
08-05-2013 11:52 AM
bnoon Yeah the dual rear outlets on the second gens can get a bit loud without cats on MS3's, let alone on a NA car with no turbo to knock the noise down. On the first gen cars the single outlet is pretty quiet without cats until you go WOT, so I'm hoping I don't have to add another resonator or larger muffler on my Focus.
08-05-2013 11:15 AM
Slo86GT A friend of mine locally is upgrading the exhaust on his 2nd gen MS3 (2012). I'll be getting this from him to see how it works on my hatch. It sounds fairly burbley on his car, I can hear him pull up from inside my home. Should be pretty throaty on an N/A car.
08-05-2013 07:40 AM
bnoon I put in my SU (Street Unit) MS3 mount over the weekend. Way more buzzy than my MS3 was with the same mount. The interior in the Focus is for sure cheaper quality than the MS3, where as the MS3 had a slight buzz at around 1,000 RPM, the Focus dash COMES ALIVE and actually moves for a moment. Once out of the low RPM load everything calms down quite a bit, but dang!!!

There are some improvements to be had on the passenger's side mount for sure too. I put up a comparison shot of the stock SE Focus mount vs a stock MS3 mount. The MS3 mount is stiffer, larger, and has larger cushion pads on the sides. I'm going to perform some slight modifications to limit side to side movement a little more (a trick I learned on my old MS3 back before aftermarket mounts were out for them). I'll document everything in my build thread here.

I had the car up on ramps too and laid out my MS3 exhaust pieces under the car and everything *should* line up. I didn't get pictures of that since I was in a hurry. Hopefully I can do the exhaust in about 2 months when my new house is ready. (pics of my home renovation will be posted in off topic forum if we have one).
07-31-2013 08:05 AM
bnoon OK, just got my gen one MS3 parts delivered last night. I got springs, stock MS3 cat-back exhaust (owner cut to remove, but should easily weld), and stock engine mounts. $300 shipped, which may or may not sound like a lot, but these are some HEAVY parts to ship! Also, for reference, the stock MS3 cat-back is barely a restriction on a modded MS3 pushing 300 to the wheels. I only saw 8 HP peak gain dropping it on the dyno, so that stock cat back should be nice and open flowing behind my OBX long tube catless header that should also be here very soon.
07-22-2013 02:03 PM
bnoon I used to have a 2008.5 MS3 GT and several parts under the hood seem really familiar on my 2013 Focus SE. Too bad for me I just found/sold my spare MS3 intake manifold with throttle body a few months ago... The classifieds are a great place to get used springs, sways, and exhaust as those guys are VERY performance oriented and upgrade the go fast parts more than anything else x 10. Another good site for their used parts will be forums, but you have a larger group of regular 3 stuff there too so sift through it.
07-14-2013 01:24 AM
Zuesskroph Don't know if anyone cares but mk2 upgraded water pump pullies fit on the mk3 = P
06-28-2013 11:28 AM
Originally Posted by TORQUERULES View Post
The 2010+ MS3 rear sway bar needs added to this list. It is a 26mm solid bar. Use Prothane or Energy Suspension urethane bushings with "B" brackets. You can get either with or without grease fittings. Move the factory MS3 location collars inboard some to clear new bushings. Just tap them with a mallet and a screwdriver or punch. They will move with little force. They will stay in place, but you can put a hose clamp beside them if you are worried.

These bars can be had used for as little as $40. Look at online salvage sites or Mazda forums.

Of course the many available aftermarket MS3 bars will work too. Some are HUGE.
Very intersted in hearing how the long term review on this is going. For $40 it's well worth a shot, although i couldnt find any on the ms3 forums for cheaper than $85 + shipping.
This thread has more than 10 replies. Click here to review the whole thread.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 11:38 PM.

Copyright 2002-2015 All Rights Reserved : Privacy Policy : Advertise Information

Focus Fanatics Ford Focus Forum offers many fun ways for you to engage with other Ford Focus Owners from across the world. Whether it be about the aftermarket performance modifications, technical how-to's, European tuned suspension or awesome fuel economy similar to the Mazda CX-3, Audi S3, Mazda MX-5 Miata and Acura TLX. You can find all Ford Focus, Focus ST and Focus RS related information here. Join our Ford Focus discussion forums and chat with local Focus enthusiasts in your area. If you own other makes have a look at Challenger Hellcat Forum, Charger Hellcat Forum, Cadillac ATS-V Forum, Cadillac CTS-V Forum, Lexus RC-F Forum, Lexus GS-F Forum, Mercedes GLA Forum, Mercedes GLE Forum and Volvo XC90 Forum.


Search Engine Optimization by vBSEO 3.6.1