|05-03-2012 10:46 AM|
|Schroeder02||If I remember it 1/16 toe out the front and 0 in the rear|
|05-03-2012 10:41 AM|
|Schroeder02||Also if I make any adjustments I would do it with springs, I use a standard metric coil over spring so I can change to spring rates to pretty much anything I like.|
|05-03-2012 10:40 AM|
gotcha, makes sense.
do you happen to know your alignment specs?
|05-03-2012 10:36 AM|
|Schroeder02||No with the springs I have in the back it has a little bit of over steer , I can get the back to move with the gas or the brake, it not twitchy at all|
|05-03-2012 08:59 AM|
|GodLovesUgly||do you plan on playing with the sway bars? i really love the feel of a bigger rear bar on my SVT, the thing rotates a lot better.|
|05-03-2012 08:40 AM|
As for my car Iím running a stock size rotor with Carboteck Xp12 front pads and XP10 rears, typically I get about 6 to 8 days out of the fronts and same for the rotors. I tried to run the front rotors though 2 sets of pads but it was too much and I cracked a rotor clear though. I also have SS brake lines and I also run Castrol SRF brake fluid, and I have a front brake cooling set up.
Iím running toyo Proxy RA1ís, the suspension is KW variant 3ís with H&R springs are spring rates 450 front and 575 rear. I also have Fswork front camber plated set a -3.5deg of camber and -1.5 in the rear, sway bars are stock.
The motor has a Jackson Racing SC and makes 205whp, with a stock clutch ORP and 2.5 exhaust I also have a Torsion diff. I also removed the AC and the care is fully gutted and weighs around 2600.
|05-02-2012 03:54 PM|
Cool video. When was the video taken?
Just got back from Spring Rumble at Summit Point this weekend. First time getting the SVT on the track and it was a blast.
There was only 1 other SVTF at the event and he was HPDE-4 and ended up having brake issues and ran off course into the tire wall before turn 1.
Glad I could drive mine home in one piece.
What setup are you running? i.e. Brakes/Suspension/Tires/Engine Mods??
|04-27-2012 10:54 AM|
|reillydog||Nice Job dude!|
|04-26-2012 09:44 AM|
|04-25-2012 10:14 AM|
Looked good Brian.
Man could there have been any more Miatas out there with you??
|This thread has more than 10 replies. Click here to review the whole thread.|