|11-30-2012 12:03 PM|
|Timken500||Thanks going to order them from massive with the bolt. Think I am going to do this to keep my peace of mind. Does everyone just buy the Motorcraft Timing belt ??|
|11-30-2012 11:49 AM|
Massive sells them (vendor on here you've probably seen) for I think around $30. OTC sells them for probably cheaper, in fact here's a link for a $22 set http://www.tooltopia.com/otc-tools-6...aign=nextag_r1
I just googled "Ford Zetec timing belt tool" and saw a lot of options.
|11-30-2012 08:36 AM|
|Timken500||Any one know right off hand where you get the Special tools and how much they cost ??|
|11-29-2012 10:53 PM|
I've added it to the How-To Archive actually.
And the Archive is a sticky in the technical issues area.
|11-29-2012 10:30 PM|
|11-29-2012 01:21 AM|
^^ Definitely a great guideline from Ford.
I have used that guideline as well when I first did my timing belt a few years back.
|11-28-2012 08:22 AM|
So for all who are looking for a guide to replace your timing belt, I have found a guide.
|06-13-2012 12:05 AM|
|blackonblacksvt03||good writeup on the zx2 but very little applys to SVTFs being as we have no lineup hole on the vct gear that and zx2s are intake VCT where ours is exhaust|
|06-12-2012 07:32 PM|
This might be helpful to understand a little more
|04-18-2012 12:20 PM|
I've done a few SVT Timing belts, including my own, and I can see where you ran into some fun issues.
But after the first time, I have the right tools and help to get it down pretty quickly now.
Props on working on it for the first time.
|This thread has more than 10 replies. Click here to review the whole thread.|