|06-12-2014 10:12 AM|
This is the one I got:http://www.ebay.com/itm/MirrorMount-...item2c7ff078d0
Works very well. The only problem was the wire tap, really flimsy wires to back probe my mirrors wiring harness, so I used a solder-less connectors. The power cord has a built in, in-line fuse, so no worries there.
|06-12-2014 09:49 AM|
|bama_focus||Thank you! Exactly what I was wondering just couldn't tell in the picture. Looking to do this in my car soon, tired of slinky cord drooping down the dash.|
|06-12-2014 09:27 AM|
the detector came with a cig lighter plug (that has a mute button on it) and a coiled cord. i'm not using that anymore.
i replaced it with one of these (see pic), it was pretty cheap on ebay. you mount the button somewhere and then run the power supply to your fuse box (i used an add-a-fuse like nmd55 posted) and run the cord to the detector up the pillar and across above the headliner.
|06-12-2014 01:03 AM|
|06-12-2013 12:11 PM|
i got a MirrorMount for my (bel 995) from amazon for about thirty bucks. holds the detector pretty well. i didn't really want it on the mirror but i wanted it up high and not attached to the windshield, and that seemed to be the only place (that would still let me flip the visors and not hit the detector)
i've got a remote mute switch ("smartcord") mounted with double-sided tape down by my knee.
one important note - if you go this route, make sure the pillar you choose will reach where you want to power it (and optionally, where you want the mute button to be). i had everything wired under the dash and pulled up the passenger A-pillar before i realized (due to where i put the mute button) it wouldn't reach over to the mirror and down to the detector. i had to switch and run it up the driver's A-pillar instead. d'oh!
here are some pics of the mount i have:
and where i located my Mute button:
|06-11-2013 03:53 PM|
|dbsimms63||getting ready to do this for my V-1|
|04-28-2013 02:08 AM|
|fiveofocus||hey man great writeup! #85 worked perfect for me! thanks to you my hardwire on my blendmount took 10 minutes!|
|02-06-2013 06:20 PM|
|thejordan||focusst.org has the info you're looking for.|
|02-06-2013 03:50 PM|
what BCM are you referring to?
my car is a 2013 Focus ST and the Smart Junction box in the passenger footwell looks exactly like that picture.
|02-06-2013 03:43 PM|
|thejordan||What car? My '13 BCM does not look like that.|
|This thread has more than 10 replies. Click here to review the whole thread.|